站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

PA6582-AL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $4.47
240 $3.82
480 $3.32
1200 $2.62
2400 $2.29
4800 $2.09

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments PMP20588一起使用

输入电压 输出 1 功率 Fsw
Sec Aux
6 V 32 V 54 V , 0.6 A 10.2 V , 0.02 A 32.4 W 150 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±10%)
最小电感
  10.3 A (µH)
DCR max (Ω) 3 最大
漏电感
(µH) 4
匝数比 5 隔离
电压 (Vrms) 6
Pri Sec Aux Pri : Sec : Aux
PA6582-AL 9.0 7.2 0.010 0.162 0.131 0.10 1 : 5 : 1 1500
注释
  1. Output of the auxiliary winding is 10.2 V.
  2. Inductance is for the primary, measured at 150 kHz, 0.1 Vrms, 0 Adc
  3. DCR for primary is per both windings connected in parallel, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Leakage inductance is for the primary winding with the secondary windings shorted.
  5. Turns ratio is with the primary windings connected in parallel.
  6. 1500 Vrms, one minute isolation (hipot) from pri and aux to sec.
    500 Vrms, one minute isolation (hipot) from pri to aux.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.
环境
环境:
符合RoHS
环境温度范围:
−40°C to +85°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+125°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

pa6582s.gif

物理特性

pa6582d.gif

dims_inches_mm-(3).gif

一般规格

核心材料:
Ferrite
重量:
24.3 g

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品系列