站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

HA380x Flyback Transformer

for TI TPS23753 PoE Interface

符合RoHS
  • Developed for Texas Instruments TPS23753 for use at 125 kHz.
  • Windings optimized for hiccup overload protection

立即购买:
计数 单价
1 $9.66
200 $7.89
600 $3.55
1200 $2.76
2400 $2.37
4800 $2.17

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments TPS23753一起使用

零件号 输入电压 输出 1 功率 Fsw
Sec Drive Bias
HA3801-BL_ 36 V 57 V 3.3 V , 3 A 5.6 V , 0.01 A 10 V , 0.02 A 10 W 125 kHz
HA3802-BL_ 36 V 57 V 5 V , 2 A 7.5 V , 0.01 A 10 V , 0.02 A 10 W 125 kHz
HA3803-BL_ 36 V 57 V 12 V , 0.83 A 6 V , 0.01 A 10 V , 0.02 A 10 W 125 kHz

规格

Electrical specifications at 25°C.

零件号 2
(Hover for schematics)
0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  1.2 A (µH)
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Drive Bias Pri Drive Pri : Sec : Drive : Bias
HA3801-BL_ 166.5 150.0 0.735 0.027 0.510 1.050 2.5 0.41 1 : 0.154 : 0.27 : 0.5 1500
HA3802-BL_ 150.0 135.0 0.520 0.028 0.560 0.880 1.9 0.40 1 : 0.25 : 0.31 : 0.44 1500
HA3803-BL_ 166.5 150.0 0.760 0.103 0.475 1.100 1.8 0.25 1 : 0.5 : 0.25 : 0.5 1500
注释
  1. Output of the secondary is with the windings connected in parallel. 10 W output from 36 – 57 V PoE input or 24 V adapter; 6 W output from 12 V adapter. Bias winding output is 12 V, 20 mA.
  2. When ordering, please specify packaging code: HA3803-BLD.
  3. Inductance is for the primary, measured at 100 kHz, 0.1 Vrms.
  4. DCR for secondary is with windings connected in parallel.
  5. Leakage inductance for the primary is with the secondary and drive windings shorted; leakage inductance for the drive winding is with the secondary windings shorted.
  6. Turns ratio is with both secondary windings connected in parallel.
  7. 1500 Vrms, one minute isolation, primary and bias to secondary

端子:

  • RoHS-compliant. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (200 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

c1173s.gif

Secondary windings to be connected
in parallel on the PC board

物理特性

ha3803-bld.gif

dims_inches_mm-(5).gif

卷装规格

tapereel_pl-(48).gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(8).gif
200 330 100 13 50,4 44,4 44 28 4 2 9,6 0,4

一般规格

核心材料:
Ferrite
重量:
5.0 – 5.3 g
包装:
200 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

相关产品系列