站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

Flyback Transformers

for STMicroelectronics PM8803

符合RoHS
  • Designed for 20 Watt applications
  • Operates in continuous conduction mode at 250 kHz with 42 – 57 V input voltage

立即购买:
计数 单价
1 $4.38
175 $3.76
350 $3.27
700 $2.85
1400 $2.21
2800 $1.89

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与STMicroelectronics PM8803一起使用

零件号 输入电压 输出 1 功率 Fsw
Sec Bias
HA3691-AL_ 42 V 57 V 5 V , 4 A 10 V , 0.02 A 20 W 250 kHz
JA4173-AL_ 42 V 57 V 3.3 V , 6 A 10 V , 0.02 A 20 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 2
(Hover for schematics)
0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  1.3 A (µH)
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
HA3691-AL_ 100 90 0.185 0.009 0.340 0.81 1 : 0.25 : 0.469 1500
JA4173-AL_ 100 90 0.211 0.006 0.404 1.6 1 : 0.156 : 0.5 1500
注释
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 10 V, 20 mA.
  2. When ordering, please specify packaging code: HA3691-ALD.
  3. Inductance measured at 250 kHz, 0.2 Vrms, 0 Adc.
  4. DCR for the secondary is with windings connected in parallel.
  5. Leakage inductance is for the primary and is measured with the secondary shorted.
  6. Turns ratio is with the secondary windings connected in parallel.
  7. 1500 Vrms, one minute isolation from primary and bias to secondary.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

ha3691s.gif
 

Secondary windings to be connected
in parallel on the PC board.

物理特性

ha3691d.gif


dims_inches_mm-(5).gif

卷装规格

tapereel_pl-(47).gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(7).gif
175 330 100 13 38,4 32,4 32 28 4 2 12,93 0,5

一般规格

核心材料:
Ferrite
重量:
6.5 g
包装:
175 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 28 mm pocket spacing, 12.93 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Only pure water or alcohol recommended

相关产品系列