站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DA2420-AL and DA2421-AL PoE Transformers

for ST Micro STE12PS

符合RoHS
  • Developed for ST Microelectronics STE12PS 12-Channel PSE Power Controller

立即购买:
计数 单价
1 $2.23
175 $2.00
700 $1.67
1400 $1.39
2800 $1.21
5000 $1.05

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与STMicroelectronics STE12PS一起使用

输入电压 输出 功率 Fsw
3.3 V 12 V , 0.1 A 1.2 W 330 kHz

规格

Electrical specifications at 25°C.

零件号 1
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±10%)
最小电感
  2 A (µH)
DCR max (Ω) 3 最大
漏电感
(µH) 4
匝数比 5 隔离
电压 (Vrms) 6
Pri Sec Pri : Sec
DA2420-AL_ 330 297 0.408 5.920 6.0 1 : 2 500
DA2421-AL_ 330 297 0.459 14.150 4.8 1 : 3 500
注释
  1. When ordering, please specify packaging code: e.g. DA2420-ALD
  2. Inductance is for the primary, measured at 100 kHz, 0.1 Vrms, 0 Adc.
  3. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Leakage inductance measured on the primary windings with all secondary pins shorted.
  5. Turns ratio is with the primary windings connected in parallel.
  6. 500 Vdc isolation from primary to secondary.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations.

包装:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (175 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

da2420schematic.gif

Primary windings to be connected
in parallel on the PC board.

物理特性

da2420dimensions.gif

dims_inches_mm.gif
 

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T da2420orientation.gif
175 330 100 13 50,4 44,4 44 32 4 2 11,9 0,4

一般规格

重量:
14.1 – 14.6 g
包装:
175 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.p mm pocket depth

焊接

抗焊接热:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
焊接之前,请参阅焊接线艺元件

相关产品系列