站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

Flyback Transformer

for Texas Instruments LM5071

符合RoHS
  • Developed for Texas Instruments LM5071PD Controller
  • Offers 84% efficiency as specified in Texas Instruments application note AN-1430
  • Designed to operate in continuous mode at 250 kHz with input voltage of 24 – 60 V
  • Industry standard EP13 surface mount package
  • Coilcraft's DA2257-AL and FA2519-AL are designed for the NSC LM5071 and LM5072
  • The FA2677-AL is specified by NSC for LM5072

立即购买:
计数 单价
1 $2.49
175 $2.14
700 $1.86
1400 $1.45
2800 $1.25
5000 $1.13

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments LM5071一起使用

输入电压 输出 功率 Fsw
Sec Aux
24 V 60 V 3.3 V , 4 A 10 V , 0.05 A 13 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 1
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±10%)
最小电感
  1 A (µH)
DCR max (Ω) 3 最大
漏电感
(µH) 4
匝数比 隔离
电压 (Vrms) 5
Pri Sec Aux Pri : Sec : Aux
DA2383-AL_ 127.0 114.3 0.255 0.012 0.310 1.25 1 : 0.167 : 0.5 1500
注释
  1. When ordering, please specify packaging code: e.g. DA2383-ALD
  2. Inductance is for the primary, measured at 200 kHz, 0.2 Vrms, 0 Adc.
  3. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Leakage inductance measured on the primary winding with all secondary pins shorted.
  5. 1500 Vrms, one minuteisolation from primary and aux to secondary.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

da2383schematic.gif

Secondary windings to be connected
in parallel on the PC board

物理特性

da2383dimensions.gif

dims_inches_mm.gif
 

卷装规格

tapereel_pl.gif

 
Parts per reel

 

Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T da2383orientation.gif
175 330 100 13 38,4 32,4 32 28 4 2 12,93 0,5

一般规格

核心材料:
Ferrite
重量:
5.97 g
包装:
175 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 28 mm pocket spacing, 12.93 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More Info.

相关产品系列