站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DA2362-AL

DA2362-ALD

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $2.38
175 $2.04
700 $1.78
1400 $1.55
2800 $1.33
5000 $1.22

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与NXP MC34670一起使用

输入电压 输出 1 功率 Fsw
Sec Bias
36 V 80 V 5 V , 2.6 A 12 V , 0.02 A 13 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 2
(Hover for schematics)
0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  1 A (µH)
DCR max (Ω) 4 最大
漏电感
(nH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
DA2362-AL_ 127.0 114.3 0.222 0.405 0.039 950 1 : 0.25 : 0.594 1500
注释
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 12 V, 20 mA.
  2. When ordering, please specify packaging code: e.g. DA2362-ALD
  3. Inductance is for the primary, measured at 250 kHz, 0.2 Vrms, 0 Adc.
  4. DCR for the secondary is per winding.
  5. Leakage inductance measured between pins 3 and 4 with secondary pins shorted.
  6. Turns ratio is with the secondary windings connected in parallel.
  7. 1500 Vrms primary to secondary isolation.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C.
Packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

da2362schematic.gif

Secondary windings to be connected
in parallel on the PC board

物理特性

da2257dimensions.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T da2362orientation.gif
175 330 100 13 38,4 32,4 32 20 4 2 12,93 0,4

一般规格

核心材料:
Ferrite
重量:
6.3 g
包装:
175 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 28 mm pocket spacing, 12.93 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Only pure water or alcohol recommended

相关产品系列