站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

D1766-AL

D1766-ALD

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $2.86
175 $2.55
700 $2.14
1400 $1.78
2800 $1.55
5000 $1.35

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Analog Devices LTC4267一起使用

输入电压 输出 1 功率 Fsw
Sec1 Sec2 Sec3
36 V 72 V 1.8 V , 2.5 A 2.5 V , 1.5 A 3.3 V , 0.5 A 10 W 200 kHz

规格

Electrical specifications at 25°C.

零件号 2
(Hover for schematics)
0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  1.5 A (µH)
DCR max (Ω) 最大
漏电感
(µH) 4
匝数比 隔离
电压 (Vrms) 5
Pri Sec1 Sec2 Sec3 Pri : Sec1 : Sec2 : Sec3
D1766-AL_ 221 200 0.420 0.013 0.015 0.030 5.1 1 : 0.104 : 0.042 : 0.042 1500
注释
  1. All outputs are referenced to ground.
  2. When ordering, please specify packaging code: e.g. D1766-ALD
  3. Inductance is for the primary, measured at 200 kHz, 1.1 Vrms, 0 Adc.
  4. Leakage inductance is for the primary and is measured with secondary windings shorted.
  5. 1500 Vrms primary to secondary isolation.

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

d1766s.gif

The three secondary windings are to be connected in series on the board by connecting pins 9, 8 and 7 together and pins11 and 10 together. Outputs at pins 12, 11,10 and 8,7 are referenced to ground (pins 5,6).

物理特性

d1766dimensions.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T d1766orientation.gif
175 330 100 13 50,4 44,4 44 32 4 2 11,9 0,4

一般规格

核心材料:
Ferrite
重量:
12.7 g
包装:
175 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.9 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More Info.

相关产品系列