站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

C1048-AL

C1048-ALD

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $5.35
200 $4.30
600 $2.58
1200 $2.02
2400 $1.72
5000 $1.58

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments LM5071/LM5072一起使用

输入电压 输出 1 功率 Fsw
Sec Bias
36 V 72 V 5 V , 2 A 15 V , 0.2 A 13 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 2
(Hover for schematics)
0A时的
电感 (µH) 3
(公差: ±10%)
最小电感
  1.2 A (µH)
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 6 隔离
电压 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
C1048-AL_ 94 85 0.210 0.010 0.453 3.9 1 : 0.12 : 0.47 1500
注释
  1. Output is with the secondary windings connected in parallel. Output of the bias winding with a 15 V, 0.2 A
  2. When ordering, please specify packaging code: e.g. C1048-ALD
  3. Inductance is for the primary, measured at 250 kHz, 0.3 Vrms, 0 Adc.
  4. DCR is for both windings of the secondary connected in parallel.
  5. Leakage inductance is for the primary winding with the secondary windings shorted.
  6. Turns ratio is with the secondary windings connected in parallel
  7. 1500 Vrms, one minute primary to secondary isolation.

端子:

  • RoHS tin-silver (96.5/3.5) over tin over nickel over phos bronze. Other terminations available at additional cost.

包装:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (200 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

c1048s.gif


Secondary windings to be connected
in parallel on PC board

物理特性

c1048d.gif


dims_inches_mm-(2).gif

卷装规格

tapereel_pl-(35).gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
175 330 100 13 50,4 44,4 44 32 4 2 11,9 0,4

一般规格

核心材料:
Ferrite
重量:
5.1 g
包装:
200 per 13″ reel Plastic tape: 44 mm wide, 0.35 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More info.

相关产品系列