站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

AA1030-AL

符合RoHS AEC-Q flag

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $18.37
100 $13.13
250 $9.86
500 $6.59
1000 $5.51
2500 $4.96
5000 $4.51

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Skyworks Si34071一起使用

输入电压 输出 1 功率 Fsw
Sec Bias
42.5 V 57 V 12 V , 6 A 15 V , 0.2 A 100 W 200 kHz 350 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±25%)
DCR max (Ω) 最大
漏电感
(µH) 3
匝数比 电压-时间
乘积 (V-µs) 4
隔离
电压 (Vrms) 5
Pri Sec Bias Pri : Sec : Bias
AA1030-AL 255.0 0.026 0.007 0.059 0.300 1 : 0.57 : 0.57 131 1500
注释
  1. Output is for secondary. Auxiliary winding output is 15 V, 0.2 A.
  2. Inductance measured on an Agilent/HP 4284 at 300 kHz, 0.6 Vrms, 0 Adc between pins 2 and 5 with pins 3 and 4 connected.
  3. Leakage inductance measured at 300 kHz, 0.6 Vrms, 0 Adc between pins 2 and 5, with pins 3 and 4 connected, and with all secondary pins shorted.
  4. Volt-time product is for the primary, between pin 2 and 5 with pin 4 and 3 connected.
  5. 1500 Vrms, one minute isolation (hipot) from primary and aux to secondary

端子:

Matte tin over nickel over brass

包装:

36 per tray
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

aa1030s.gif

物理特性

aa1030d.gif

dims_inches_mm.gif

一般规格

核心材料:
Ferrite
重量:
13 g

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested with pure water or alcohol only. More info.

相关产品系列