站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZD2020-AE

Isolated buck transformer

符合RoHS 无卤素 AEC-Q flag
  • Designed for an input voltage range of 5 to 24 V with dual isolated outputs
  • Suitable for isolated IGBT/SiC gate driver, On-board charger for HEV/EV, and industrial application.
  • Functional insulation only. Basic or reinforced versions can be made available per request.
  • AEC-Q200 qualified

立即购买:
计数 单价
1 $4.40
225 $2.70
450 $1.62
900 $1.26

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
功率 (W) 输入电压 (V) 0A时的
电感 (µH) 1
(公差: ±10%)
Isat (A) 2 DCR max (Ω) 最大
漏电感
(µH) 3
匝数比 频率 (kHz) 隔离
电压 (Vrms) 4
次级
输出 (V, A) 5
Pri Sec1 Sec2 Pri : Sec1 : Sec2
ZD2020-AED 5 12 20.0 1.9 0.138 0.426 0.175 0.73 1 : 1.56 : 0.44 250 1500 20 V , 0.2 A
注释
  1. Inductance is for the primary, measured at 250 kHz, 0.1 Vrms, 0 Adc.
  2. DC current that causes the primary inductance to drop 30% from its value without current.
  3. Leakage inductance is for the primary with the secondary windings shorted.
  4. 1500 Vrms, one minute isolation (hipot) between primary and secondary windings.
  5. Sec2 output -5 V, 0.20 A

端子:

  • RoHS-compliant, halogen free. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (900 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+165°C (Ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

L vs Current

原理图

zd2020s.gif

物理特性

zd2020d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
900 330 100 13 22,4 16,4 16 12 4 2 6,0 0,35

一般规格

核心材料:
Ferrite
重量:
0.57 – 0.77 g
包装:
900 per 13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 6.0 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件

相关产品系列