站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZC1905-BE

符合RoHS 无卤素 AEC-Q flag

有关该元件的更多信息和规格。

前往系列
立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与STMicroelectrics STEVAL-A6986IV3一起使用

输入电压 输出 1 功率 Fsw
28 V 30 V , 0.1 A 3 W 500 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±10%)
Isat (A) 3 DCR max (Ω) 最大
漏电感
(µH) 4
匝数比 5 隔离
电压 (Vrms) 6
Pri Sec1 Sec2 Sec3 Sec4 Pri : Sec1
ZC1905-BED 20 4.8 0.05 1.95 1.95 1.95 1.13 0.25 1 : 2.69 1500
注释
  1. Sec1, Sec2, Sec3 outputs: 30 V, 0.10 A; Sec4 output: 30 V, 0.25 A.
  2. Inductance is for the primary, measured at 500 kHz, 0.1 Vrms, 0 Adc.
  3. DC current that causes the primary inductance to drop 30% from its value without current.
  4. Leakage inductance is for the primary with the secondary windings shorted.
  5. The turns ratio from the primary to each of the four secondaries is 1 : 2.69.
  6. 1500 Vrms, one minute isolation (hipot) between primary and secondary windings.

端子:

  • RoHS-compliant, halogen free. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+165°C (Ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

L vs Current

原理图

zc1905s.gif

物理特性

zc1905d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
200 330 100 13 50,4 44,4 44 28 4 2 9,3 0,4

一般规格

核心材料:
Ferrite
重量:
5.1 – 5.3 g
包装:
200 per 13″ reel Plastic tape: 44 mm wide, 0.40 mm thick, 28 mm pocket spacing, 9.3 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件

相关产品系列