站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

YA9293 Transformer

for Analog Devices ADP1031

符合RoHS AEC-Q flag
  • Developed for use with isolated DC-DC regulator in Analog Devices ADP1031 isolated micropower management unit.
  • AEC-Q200 Grade 1 (−40°C to +125°C)
  • Low leakage inductance at 1.62 µH

立即购买:
计数 单价
1 $3.32
200 $2.85
600 $2.50
1200 $2.16
3000 $1.84
6000 $1.68

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Analog Devices ADP1031一起使用

输入电压 输出 功率
4.5 V 60 V 24 V , 0.02 A 0.5 W

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 1
(公差: ±20%)
Isat (mA) 2 DCR max (Ω) 最大
漏电感
(µH) 3
匝数比 隔离
电压 (Vrms) 4
Pri Sec Pri : Sec
YA9293-ALD 300 250 1.200 0.785 1.62 1 : 1 2250
注释
  1. Inductance is for the primary, measured on an Agilent/HP 4284 at 250 kHz, 0.1 Vrms, 0 Adc.
  2. DC current that causes an inductance drop of 20% (typ) from its value without current
  3. Leakage inductance is for the primary with secondary winding shorted together.
  4. Isolation (hipot) measured between windings for one minute.

端子:

  • RoHS-compliant. 260°C compatible. RoHS tin-silver-copper (95.5/3.8/0.7) over tin over nickel over phos bronze.

包装:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +165°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+165°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

ya9293s.gif

物理特性

ya9293d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f.gif
600 330 100 13 30,4 24,4 24 16 4 2 6,11 0,37

一般规格

核心材料:
Ferrite
重量:
0.99 g
包装:
600 per reel, 13″ reel Plastic tape: 24 mm wide, 0.37 mm thick, 16 mm pocket spacing, 6.11 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.