站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

UA7902 Flyback Transformer

for Silicon Labs Si88xx 5kV DC-DC Converter

符合RoHS AEC-Q flag
  • UA7902 was developed for use with Silicon Labs Si88xx isolated dc-dc-converter reference designs. Learn more about these miniature transformers for digital isolators.
  • 5000 Vrms, one minute isolation (hipot), from primary to secondary
  • Designed to meet reinforced insulation class with 8 mm creepage and clearance.
  • Ultra-miniature flyback tranformer, measures only 10.0 × 17.07 × 5.97 mm
  • AEC-Q200 Grade 1 (−40°C to +125°C)
  • Low leakage inductance, only 971 nH

立即购买:
计数 单价
1 $4.13
350 $3.48
700 $3.02
1400 $2.38
2100 $2.04
4000 $1.85

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Skyworks Si88xxx 一起使用

输入电压 输出 功率 Fsw
7 V 24 V 5 V , 0.4 A 2 W 250 kHz

规格

Electrical specifications at 25°C.

零件号 1
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±5%)
Isat (A) 3 DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 隔离
电压 (Vrms) 6
Pri Sec Pri : Sec
UA7902-AL_ 25.0 1.3 0.075 0.106 0.971 1 : 0.33 5000
注释
  1. When ordering, please specify packaging code: e.g.UA7902-ALD
  2. Inductance is for the primary, measured on an Agilent/HP 4284 at 250 kHz, 0.1 Vrms, 0 Adc.
  3. DC current that causes an inductance drop of 30% (typ) from its value without current.
  4. DCR for secondary is for the windings connected in parallel.
  5. Leakage inductance measured between pins 1 and 3 at 250 kHz, 0.1Vrms, 0 Adc with all secondary pins shorted.
  6. Isolation (hipot) measured between windings for one minute.

端子:

  • RoHS-compliant. 260°C compatible. RoHS tin-silver-copper (95.5/3.8/0.7) over tin over nickel over phos bronze.

包装:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +160°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+160°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

ua7902s.gif
Secondary windings to be connected
in parallel on PC board.

物理特性

ua7902d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f.gif
700 330 100 13 38,4 32,4 32 16 4 2 5,72 0,4

一般规格

核心材料:
Ferrite
重量:
1.1 g
包装:
700 per 13″ reel Plastic tape: 32 mm wide, 0.40 mm thick, 16 mm pocket spacing, 5.72 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.