3D Model Datasheet

NA6264-AL

有关该元件的更多信息和规格。

前往系列

立即购买:

索取样品:

典型应用

与Texas Instruments PMP7899一起使用

输入电压	输出 1		功率	Fsw
输入电压	Sec	Aux	功率	Fsw
8 V — 18 V	48 V , 1 A	9 V , 0.02 A	48 W	300 kHz

规格

Electrical specifications at 25°C.

零件号 (Hover for schematics)	0A时的电感 (µH) 2 (公差: ±15%)	最小电感 16.5 A (µH) 3	DCR max (Ω) 4			最大漏电感 (µH) 5	匝数比	隔离电压 (Vrms) 6
零件号 (Hover for schematics)	0A时的电感 (µH) 2 (公差: ±15%)	最小电感 16.5 A (µH) 3	Pri	Sec	Aux	最大漏电感 (µH) 5	Pri : Sec : Aux	隔离电压 (Vrms) 6
NA6264-AL	2.56	2.18	0.0033	0.11	0.13	0.06	1 : 6 : 1.5	1500

注释

Output is for the secondary. Aux winding output is 9 V, 20 mA.
Inductance is for the primary, measured with the windings connected in parallel at 300 kHz, 0.3 Vrms.
Ipk is the peak primary current drawn at minimum input voltage.
DCR is measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance if for the primary and is measured with the windings connected in parallel with the secondary windings shorted.
1500 Vrms, one minute isolation (hipot) from the primary and aux windings to the secondary

端子:

RoHS-compliant 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

Primary windings to be
connected on the PC board.

物理特性

一般规格

核心材料:

Ferrite

重量:

25.9 g

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

仓库

语言设定

货币设定

NA6264-AL

分享该元件

所选配置不可用

典型应用

规格

端子:

原理图

物理特性

一般规格

焊接/清洗

警告