站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

NA6264 Flyback Transformer

for Texas Instruments PMP7899

符合RoHS
  • Developed for Texas Instruments PMP7899 Reference Design for Non-Synchronous Flyback Converter with an Isolated Output

立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments PMP7899一起使用

输入电压 输出 1 功率 Fsw
Sec Aux
8 V 18 V 48 V , 1 A 9 V , 0.02 A 48 W 300 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±15%)
最小电感
  16.5 A (µH) 3
DCR max (Ω) 4 最大
漏电感
(µH) 5
匝数比 隔离
电压 (Vrms) 6
Pri Sec Aux Pri : Sec : Aux
NA6264-AL 2.56 2.18 0.0033 0.11 0.13 0.06 1 : 6 : 1.5 1500
注释
  1. Output is for the secondary. Aux winding output is 9 V, 20 mA.
  2. Inductance is for the primary, measured with the windings connected in parallel at 300 kHz, 0.3 Vrms.
  3. Ipk is the peak primary current drawn at minimum input voltage.
  4. DCR is measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  5. Leakage inductance if for the primary and is measured with the windings connected in parallel with the secondary windings shorted.
  6. 1500 Vrms, one minute isolation (hipot) from the primary and aux windings to the secondary

端子:

  • RoHS-compliant  260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C
最高元件温度:
+125°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

na6264s.gif

Primary windings to be
connected on the PC board.

物理特性

na6264d.gif


dims_inches_mm-(3).gif

一般规格

核心材料:
Ferrite
重量:
25.9 g

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.