View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

3D Model Datasheet S-Param

MSD7342-393

Name: MSD7342-393MLC
Brand: Coilcraft
SKU: MSD7342-393MLC
Price: 0.93 USD
Availability: InStock

MSD7342-393MLC

有关该元件的更多信息和规格。

前往系列

立即购买:

计数	单价
1	$2.99
250	$1.99
500	$1.19
1000	$0.93
2500	$0.80
5000	$0.74

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

M = 20%

Termination

L = Matte tin over nickel

Packaging

C = 7" machine-ready reel

. 现货，可今天发货.

索取样品:

规格

Electrical specifications at 25°C.

反激式应用

零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	隔离电压 (V)	漏电感 (nH) 5	匝数比
零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	隔离电压 (V)	漏电感 (nH) 5	匝数比
MSD7342-393ML_	39	0.38	200	700	1 : 1

SEPIC应用

零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	耦合系数	漏电感 (nH) 5	Isat (A) 6			Irms (A)
零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	耦合系数	漏电感 (nH) 5	10% drop	20% drop	30% drop	两个绕组 7	一个绕组 8
MSD7342-393ML_	39	0.38	10.0	0.99	700	1.3	1.4	1.5	0.64	0.90

注释

When ordering, please specify termination and packaging codes: MSD7342-105MLC.
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage inductance is for L1 and is measured with L2 shorted.
Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

端子:

L = Matte tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +85°C with (40°C rise) Irms current.

储存温度范围:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise).

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs Current

Inductance vs Frequency

原理图

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	22,4	16,4	16	12	4	2	4,9	0,4

* Special order

一般规格

核心材料:

Ferrite

重量:

0.76 – 0.87g

包装:

250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth

Winding to Winding Isolation:

200 Vrms, one minute

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

仓库

语言设定

货币设定

MSD7342-393

MSD7342-393MLC

分享该元件

所选配置不可用

规格

反激式应用

SEPIC应用

端子:

包装:

性能曲线

Inductance vs Current

Inductance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品

MSD7342-103

MSD7342-104

MSD7342-105

MSD7342-123

MSD7342-124

MSD7342-153

MSD7342-154

MSD7342-183

MSD7342-184

MSD7342-223

MSD7342-224

MSD7342-252

MSD7342-273

MSD7342-274

MSD7342-332

MSD7342-333

MSD7342-334

MSD7342-394

MSD7342-472

MSD7342-473

MSD7342-474

MSD7342-562

MSD7342-563

MSD7342-564

MSD7342-682

MSD7342-683

MSD7342-684

MSD7342-822

MSD7342-823

MSD7342-824

警告