站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

GA3366-BL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $8.33
100 $7.13
250 $6.21
500 $5.39
1000 $4.69
2500 $4.02
5000 $3.68

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与ON Semiconductor NCP1606一起使用

AC Input Voltage 输出 1 功率 Fsw
Sec Aux
85 V 265 V 19.5 V , 4.62 A 16 V , 0.02 A 90 W 100 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±10%)
最小电感
  3.1 A (µH)
DCR max (Ω) 3 最大
漏电感
(µH)
匝数比 隔离
电压 (Vrms) 4
Pri Sec Aux Pri : Sec : Aux
GA3366-BL 300 270 0.210 0.005 0.073 7.45 1 : 0.147 : 0.118 3000
注释
  1. Output of the auxiliary winding is 16 V, 20 mA.
  2. Inductance measured at 100 kHz, 1.1 Vrms, 0 Adc using an Agilent/ HP 4263B impedance analyzer or equivalent.
  3. DCR for the secondary is with the windings connected in parallel
  4. 3000 Vrms primary and auxiliary to secondary isolation.

端子:

  • L = RoHS compliant tin-silver over tin over copper.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C.
Tray packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

ga3366s.gif
 

Secondary windings to be connected
in parallel on the PC board

物理特性

ga3366d.gif

dims_inches_mm-(5).gif

一般规格

核心材料:
Ferrite
重量:
68 g
包装:
30 parts per tray

清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
PCB清洗:
PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.