站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

CX9721-AL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments TPS61046 一起使用

输入电压 输出 功率 Fsw
Sec Bias
5 V 20 V 5 V , 0.25 A 5 V , 0 A 0.25 W 100 kHz

规格

Electrical specifications at 25°C.

零件号 1
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±10%)
最小电感
  1 A (µH)
DCR max (Ω) 最大
漏电感
(µH) 3
匝数比 隔离
电压 (Vrms) 4
Pri Sec Bias Pri : Sec : Bias
CX9721-AL_ 10 8.0 0.08 0.08 0.08 0.16 1 : 1 : 1 4000
注释
  1. When ordering, please specify packaging code: e.g.CX9721-ALD
  2. Inductance is for the primary, measured at 100 kHz, 0.1 Vrms, 0 Adc.
  3. Leakage inductance measured at 100 kHz, 0.1 Vrms, between pins 1 and 2 with all other pins shorted.
  4. 4000 Vrms, one minute isolation from the primary and auxiliary winding to the secondary.

端子:

  • RoHS-compliant. 260°C compatible. RoHS tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (700 parts per full reel).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +160°C.
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+160°C (ambient + temp rise).
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

cx9721schematic.gif

物理特性

cx9721dimensions.gif
dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T cx9721orientation.gif
700 330 100 13 38,4 32,4 32 16 4 2 5,72 0,40

一般规格

核心材料:
Ferrite
重量:
1.08 g
包装:
700 per 13″ reel Plastic tape: 32 mm wide, 0.40 mm thick, 16 mm pocket spacing, 5.72 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.