站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

C0972-AL Transformer

for ON Semiconductor NCP1216A

符合RoHS
  • Developed for ON Semi NCP1216A DC/DC Single-Ended Forward Converter
  • Specified in Application Note AND8161/D with DS3316P inductors
  • C0972-AL Transformer features low DCR and excellent leakage inductance
  • B0754-AL Inductor features excellent current handling

立即购买:
计数 单价
1 $4.68
240 $4.01
480 $3.49
1200 $3.04
2400 $2.61
4800 $2.39

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与ON Semiconductor NCP1216A一起使用

输入电压 输出 功率 Fsw
36 V 75 V 12 V , 5 A 60 W 100 kHz

规格

Electrical specifications at 25°C.

C0972-AL Transformer

零件号
(Hover for schematics)
最小
电感 (mH) 1
DCR max (Ω) 最大
漏电感
(µH) 2
匝数比 隔离
电压 (Vrms) 3
Pri Sec Reset Pri : Sec : Reset
C0972-AL 0.82 0.056 0.031 0.480 1.5 1 : 0.91 : 1 1500

B0754-AL Inductor

零件号 0A时的
电感 (µH) 4
(公差: ±10%)
DCR max (Ω) 5 Isat (A) 6 Irms (A) 7
B0754-AL   100 0.28 8.0 4.8
注释
  1. Inductance measured at 10 kHz, 0.1 Vrms, 0 Adc.
  2. Leakage inductance measured across the primary at 100 kHz, 0.1 Vrms, 0 Adc.
  3. Isolation tested between primary and secondary and between auxiliary and secondary windings.
  4. Inductance measured at 10 kHz, 0.1 Vrms.
  5. DCR is per winding measured at 25°C. For other temperatures, use this DCR at Temperature calculator.
  6. Isat: current at which inductance drops 10% (typ) from its values without current.
  7. Irms: Current that causes the specified temperature rise from 25°C ambient. Details

端子:

  • RoHS-compliant. 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations.
环境
环境:
符合RoHS
环境温度范围:
−40°C to +85°C
储存温度范围:
Component: −40°C to +85°C
Packaging trays: −40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

c0972s.gif

物理特性

c0972d.gif
dims_inches_mm-(3)-copy.gif

一般规格

重量:
28.2 g
包装:
24 per tray

焊接

抗焊接热:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
焊接之前,请参阅焊接线艺元件