View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

3D Model Datasheet

ZE2531-105L

有关该元件的更多信息和规格。

前往系列

立即购买:

索取样品:

规格

Electrical specifications at 25°C.

零件号 1 (Hover for schematics)	0A时的电感 (µH) 2 (公差: ±30%)	DCR max (Ω)	最大漏电感 (µH) 4	匝数比	隔离电压 (Vdc) 5	Irms (mA) 3
零件号 1 (Hover for schematics)	0A时的电感 (µH) 2 (公差: ±30%)	DCR max (Ω)	最大漏电感 (µH) 4	Pri : Sec	隔离电压 (Vdc) 5	Irms (mA) 3
ZE2531-105LC	1.0	0.185	0.09	1 : 1	3000	1000

注释

When ordering, please specify packaging code: e.g. ZE2531-225LC
Inductance is measured at 100 kHz, 0.1 Vrms, 0 ADC.
Irms current is the current when applied to both windings in series that causes a 40°C temperature rise from room temperature.
Leakage inductance is measured on pins 1 and 2 with the same test parameters as inductance with pins 3 and 4 shorted.
3000 VDC, 2000 Vrms, one minute isolation (hipot) between primary to secondary.

端子:

RoHS compliant matte tin over nickel over phos-bronze

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel).

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +140°C
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+140°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Attenuation vs Frequency (Insertion Loss Sdd21)

Attenuation vs Frequency (Return Loss Sdd11)

原理图

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	22,4	16,4	16	12	4	2	4,8	0,4

* Special order

一般规格

核心材料:

Ferrite

重量:

290 – 310 mg

包装:

250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 12 mm pocket spacing, 4.8 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

ZE2531-105L

规格

端子:

包装:

性能曲线

Attenuation vs Frequency (Insertion Loss Sdd21)

Attenuation vs Frequency (Return Loss Sdd11)

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品

ZE2531-225L

相关产品系列

Transformers

Isolation Transformers

TX2 Push-Pull Transformers

ZA9801-AE Series

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

ZD2155-AE Isolated Buck Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

WA8582-AL

HTX7045 Isolation Transformers

ZE2413-AE Isolated Buck Transformer

仓库

语言设定

货币设定

ZE2531-105L

所选配置不可用

规格

端子:

包装:

性能曲线

Attenuation vs Frequency (Insertion Loss Sdd21)

Attenuation vs Frequency (Return Loss Sdd11)

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品

ZE2531-225L

相关产品系列

Transformers

Isolation Transformers

TX2 Push-Pull Transformers

ZA9801-AE Series

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

ZD2155-AE Isolated Buck Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

WA8582-AL

HTX7045 Isolation Transformers

ZE2413-AE Isolated Buck Transformer

警告