3D Model Datasheet

ZA9801-AE

有关该元件的更多信息和规格。

前往系列

立即购买:

索取样品:

典型应用

与 TI SN650x; ADI LT3999一起使用

初级电压	次级电压	功率 1	Fsw
3.3 V	5 V	5 W	150 kHz

规格

Electrical specifications at 25°C.

零件号 (Hover for schematics)	最小电感 (µH) 2	DCR max (Ω) 3		最大漏电感 (µH) 4	匝数比	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms) 6
零件号 (Hover for schematics)	最小电感 (µH) 2	Pri	Sec	最大漏电感 (µH) 4	Pri : Sec	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms) 6
ZA9801-AED	45.6	0.14	0.26	1.30	1 : 1.5	34.4	5000

注释

Calculated output power based on 150 kHz operating frequency. Power varies depending on application.
Inductance is tested between pins 4 and 3 at 150 kHz, 0.1 Vrms, 0 Adc.
DCR is per winding at 25°C. For other operating temperatures, use this use this DCR at Temperature calculator.
Leakage inductance is for the primary with both windings connected in series and with the secondary windings shorted.
Volt-time product is for the primary, between pins 4 and 1 with pins 2 and 3 connected.
5000 Vrms, one minute isolation (hipot) from primary to secondary.

端子:

E = RoHS tin-silver over tin over nickel over phos bronze.

包装:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (700 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

−40°C to +125°C

储存温度范围:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

最高元件温度:

+165°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
700	330	100	13	38,4	32,4	32	16	4	2	5,72	0,4

一般规格

核心材料:

Ferrite

重量:

1.2 g

包装:

700/13″ reel Plastic tape: 32 mm wide, 0.40 mm thick, 16 mm pocket spacing, 5.72 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Three reflows at >217°C for 90 seconds (+260°C ±:5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

ZA9801-AE

典型应用

规格

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

Transformers

Isolation Transformers

TX2 Push-Pull Transformers

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

ZD2155-AE Isolated Buck Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

WA8582-AL

HTX7045 Isolation Transformers

ZE2413-AE Isolated Buck Transformer

仓库

语言设定

货币设定

ZA9801-AE

分享该元件

所选配置不可用

典型应用

规格

端子:

包装:

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

Transformers

Isolation Transformers

TX2 Push-Pull Transformers

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

ZD2155-AE Isolated Buck Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

WA8582-AL

HTX7045 Isolation Transformers

ZE2413-AE Isolated Buck Transformer

警告