站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ZA9801-AE Series

Isolation Transformer

符合RoHS 无卤素 AEC-Q flag
Coilcraft's ZA9801 low-profile transformer is designed for use with SN650x transformer drivers from Texas Instruments and LT3999 from Analog Devices. The center-tapped push-pull transformer features increased creepage and clearance, higher isolation voltage and higher efficiency than previous generation products. It provides 5000 Vrms across the isolation barrier for interfaces such as CAN, RS-485, RS-422, RS-232, SPI, I2C , and low-power LAN in industrial and automotive applications. The ZA9801 is AEC Grade 1 qualified, making it an ideal solution for DC-DC converters in EV/HEV applications.
  • Center-tapped push-pull transformer optimized for Texas Instrument SN650x or Analog Devices LT3999 DC/DC transformer driver
  • High isolation, 5000 Vrms, one minute isolation (hipot) from primary to secondary
  • Extended version of the DA2303-AL, 8 mm Creepage and Clearance on Material Group 3
  • AEC-Q200 Grade 1 (–40°C to +125°C)

立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与 TI SN650x; ADI LT3999一起使用

初级电压 次级电压 功率 1 Fsw
3.3 V 5 V 5 W 150 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
最小
电感 (µH) 2
DCR max (Ω) 3 最大
漏电感
(µH) 4
匝数比 电压-时间
乘积 (V-µs) 5
隔离
电压 (Vrms) 6
Pri Sec Pri : Sec
ZA9801-AED 45.6 0.14 0.26 1.30 1 : 1.5 34.4 5000
注释
  1. Calculated output power based on 150 kHz operating frequency. Power varies depending on application.
  2. Inductance is tested  between pins 4 and 3 at 150 kHz, 0.1 Vrms, 0 Adc.
  3. DCR is per winding at 25°C. For other operating temperatures, use this use this DCR at Temperature calculator.
  4. Leakage inductance is for the primary with both windings connected in series and with the secondary windings shorted.
  5. Volt-time product is for the primary, between pins 4 and 1 with pins 2 and 3 connected.
  6. 5000 Vrms, one minute isolation (hipot) from primary to secondary.

端子:

  • E = RoHS tin-silver over tin over nickel over phos bronze.

包装:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (700 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+165°C
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

za9801s.gif

物理特性

za9801d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
700 330 100 13 38,4 32,4 32 16 4 2 5,72 0,4

一般规格

核心材料:
Ferrite
重量:
1.2 g
包装:
700/13″ reel Plastic tape: 32 mm wide, 0.40 mm thick, 16 mm pocket spacing, 5.72 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Three reflows at >217°C for 90 seconds (+260°C ±:5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列