站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

HTX7045-184AR

HTX7045-184ARC

符合RoHS 无卤素 AEC-Q flag

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $3.42
100 $2.79
350 $2.09
700 $1.26
1000 $0.98

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1
(Hover for schematics)
0A时的
电感 (µH) 2
(公差: ±25%)
DCR max (Ω) 最大
漏电感
(µH) 3
匝数比 电容
max (pF) 4
电压-时间
乘积 (V-µs)
隔离
电压 (Vrms) 5
Pri Sec Pri : Sec
HTX7045-184AR_ 180 0.55 0.55 1.00 1 : 1 20 51.8 2800
注释
  1. When ordering, please specify turns ratio and packaging codes: e.g. HTX7045-184ARC
    Turns ratio:  A =  1 : 1, C = 1 : 2
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc.
  3. Leakage inductance measured at 100 kHz, 0.1 Vrms with secondary pins shorted.
  4. Capacitance measured from pin 1 to pin 3, 250 KHz, 0.1 Vrms.
  5. 2800 Vrms, 4000 VDC; one minute isolation (hipot) measured between primary and secondary.

端子:

  • RoHS compliant tin over nickel over silver glass frit.

包装:

  • C = 7" machine-ready reel
    EIA 481 embossed plastic tape (350 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13" machine-ready reel
    EIA 481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel).
环境
环境:
符合RoHS , 无卤素
环境温度范围:
−40°C to +125°C
储存温度范围:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
最高元件温度:
+125°C
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Return Loss

Insertion Loss

原理图

htx7045s.gif





 

物理特性

htx7045d.gif

dims_inches_mm.gif

卷装规格

tapereel_pl.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
350 1500* 178/330 60/100 13 22,4 16,4 16 8 4 2 5,5 0,40
* Special order

一般规格

核心材料:
Ferrite
重量:
0.53 − 0.54 g
包装:
350/7" reel; 1500/13" reel Plastic tape: 16 mm wide, 0.4 mm thick, 8 mm pocket spacing, 5.5 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品

相关产品系列