View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

3D Model Datasheet

1812TRX-S124

Name: 1812TRX-S124RC
Brand: Coilcraft
SKU: 1812TRX-S124RC
Price: 1.10 USD
Availability: InStock

1812TRX-S124RC

有关该元件的更多信息和规格。

前往系列

立即购买:

计数	单价
1	$2.50
100	$2.45
300	$1.84
600	$1.10
1200	$0.86

对于大批量采购或非库存产品，点击这里请求报价。

Termination

R = Matte tin over nickel over silver-platinum-glass frit

Packaging

C = 7" machine-ready reel

. 现货，可今天发货.

索取样品:

规格

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

零件号 1 (Hover for schematics)	每个绕组的最小电感 (µH) 2	测试频率 (kHz)	DCR max (Ω)	额定电流 (mA)	插入损耗 (db)	带宽 (MHz)	隔离电压 (Vrms) 3	匝数比
Pri	Pri
1812TRX-S124R_	120	100	2.5	430	0.15	0.1 — 1100	1500	1 : 1

注释

When ordering, please specify packaging code: e.g. 1812TRX-S254RC
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter and a Coilcraft CCF 1113 fixture.
1500 Vrms, one minute isolation (hipot) between primary to secondary.

端子:

R = RoHS compliant matte tin over nickel over silver-platinum-glass frit

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel).

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C with Irms current

储存温度范围:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+140°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Insertion Loss

Return Loss

原理图

物理特性

L	M	N	P	R	S	T
0.039	0.028	0.022	0.071	0.052	0.028	0.028	inches
1,0	0,70	0,55	1,80	1,325	0,70	0,70	mm

卷装规格

Parts per reel*		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,25	0,25

* Special order

一般规格

核心材料:

Ferrite

重量:

120 – 130 mg

包装:

600/7″ reel; 2200/13″ reel Plastic tape: 12 mm wide, 0.25 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

仓库

语言设定

货币设定

1812TRX-S124

1812TRX-S124RC

分享该元件

所选配置不可用

规格

端子:

包装: