站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

CS2106 50/60 Hz Current Sense Transformer

符合RoHS
  • For measuring current from 0.5 to 20 Amps rms
  • 0.1 Volt per Ampere (with terminating resistance of 50 Ohms)
  • May also be used to measure 400 Hz line currents
  • Applications include sensing branch circuit overload and detecting load drop or shutdown

立即购买:
计数 单价
1 $15.69
100 $14.00
250 $11.66
500 $9.71
1000 $8.46
2500 $7.36
5000 $6.40

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
最小
电感 (mH) 1
DCR max (Ω) 2 匝数比 频率 (Hz) 电流 (A) 终端
电阻 RT (Ω) 3
隔离
电压 (Vrms) 4
Pri Sec Pri : Sec
CS2106L 75 0.0070 26.0 1 : 500 50 400 20.0 50.0 2500
注释
  1. Inductance is for the secondary, tested at 1 kHz, 0.1 Vrms.
  2. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  3. Use the following equation to determine the approximate change in output voltage/ input ampere when varying the terminating resistor: Vout / Iin = 0.1 × (RT / 50).
  4. 2500 Vrms isolation (hipot), one minute between windings.

端子:

  • RoHS-compliant. Tin-silver over tin over nickel over copper terminations.
环境
环境:
符合RoHS
环境温度范围:
−40°C to +85°C
储存温度范围:
Component: −40°C to +85°C
Packaging trays: −40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Typical Response CS2106 Series 50/60 Hz Current Transformers

原理图

sen60tra.gif                sentr60s.gif

Use the following equation to determine the approximate change in output voltage/ input ampere when varying the terminating resistor: Vout / Iin = 0.1 × (RT / 50).

物理特性

sen60trd.gif

一般规格

重量:
19 g

清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列