站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

RA6992-BL SMT Planar Transformer

for Texas Instruments UCC2897

符合RoHS
  • Developed for TI UCC2897 Active Clamp Forward (PMP9656 Reference Design)
  • Provides 0.009 inch (0.229 mm) clearance above the seating plane

立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与Texas Instruments UCC2897一起使用

输入电压 输出 功率
48 V 60 V 12 V , 21 A 250 W

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 1
(公差: ±20%)
DCR max (mΩ) 2 最大
漏电感
(µH) 3
匝数比 电压-时间
乘积 (V-µs) 4
隔离
电压 (Vrms) 5
Pri Sec Aux Pri : Sec : Aux
RA6992-BL 50 6.9 4.2 82.0 0.25 1 : 0.5 : 0.5 206 1500
注释
  1. Inductance measured on an Agilent/HP 4284 at 200 kHz, 0.5 Vrms, 0 Adc with windings connected in parallel.
  2. DCR for primary is measured with the windings connected in parallel. DCR for secondary is measured between pins 7 and 11.
  3. Leakage inductance is for the primary with windings connected in parallel, measured at 200 kHz, 0.5 Vrms, 0 Adc with all secondary pins shorted.
  4. Volt-time product is based on primary windings connected in parallel.
  5. 1500 Vrms, one minute isolation (hipot) from primary to secondary.

端子:

  • RoHS-compliant  260°C compatible. Matte tin over nickel over brass terminations.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +125°C
Tray packaging: –40°C to +80°C
最高元件温度:
+125°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

ra6992s.gif

Primary windings to be connected
in parallel on the PC board.

物理特性

ra6992d.gif

dims_inches_mm.gif

一般规格

核心材料:
Ferrite
重量:
26.5 g
包装:
25 per tray

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列