Datasheet 3D模型

PL300 Series

SMT Planar Transformers

Rated for 300 Watts between 200 kHz and 700 kHz with a nominal 48 V input.
High efficiency; excellent DCR; very low leakage inductance
AEC-Q200 Grade 1 (−40°C to +125°C)
1500 Vrms, one minute primary to secondary isolation.
Provides 0.009 inch (0.229 mm) clearance above the seating plane
Can be special ordered with an optional auxiliary winding
The smaller PL160 Series is rated at 160 Watts
RoHS-compliant. 260°C compatible. Matte tin over nickel over brass terminations
Two samples of each PL300 and PL160 parts are available in Coilcraft Designer's Kit C460

立即购买:

零件号

查找我的元件

计数	单价
1	$11.64
100	$9.96
250	$8.66
500	$7.53

对于大批量采购或非库存产品，点击这里请求报价。

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

设计套件:

套件	电感值	价格
C460	10 (2 of each)	$60.00

规格

Electrical specifications at 25°C.

零件号 1 (Hover for schematics)	功率 (W)	输入电压 (V)	最小电感 (µH) 2	DCR max (mΩ) 3			最大漏电感 (µH) 4	匝数比	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms)
零件号 1 (Hover for schematics)	功率 (W)	输入电压 (V)	最小电感 (µH) 2	Pri1	Pri2	Sec	最大漏电感 (µH) 4	Pri1 : Pri2 : Sec	电压-时间乘积 (V-µs) 5	隔离电压 (Vrms)
PL300-100L	300	36 — 72	287	7.2	7.2	4.2	0.25	1 : 1 : 1	206	1500
PL300-101L	300	36 — 72	448	9.0	9.0	4.2	0.35	1 : 1 : 0.8	258	1500
PL300-102L	300	36 — 72	635	10.6	10.6	4.2	0.50	1 : 1 : 0.67	310	1500
PL300-103L	300	36 — 72	864	12.3	12.3	4.2	0.75	1 : 1 : 0.57	361	1500
PL300-104L	300	36 — 72	1075	13.8	13.8	4.2	1.0	1 : 1 : 0.5	413	1500

注释

To order a transformer with an optional auxiliary winding, add an “X” and the turn count after the PL300, e.g. PL300X3-100LB.
Turn counts of 1, 2, 3, 4, 5, 7 and 9 are available for the auxiliary winding.
Transformers with auxiliary windings are not stocked. Call for lead time.
Inductance measured on an Agilent/HP 4284 at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5 with pins 3 and 4 connected.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator. DCR for secondary is measured between pins 7 and 11.
Leakage inductance measured at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5, with pins 3 and 4 connected, and with all secondary pins shorted
Volt-time product is based on primary windings connected in series.

端子:

Matte tin over nickel over brass.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +125°C

储存温度范围:

Component: –40°C to +125°C
Tray packaging: –40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

原理图

物理特性

一般规格

核心材料:

Ferrite

重量:

22.5 – 26.0 g

包装:

25 per tray

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested with pure water or alcohol only. More info.

PL300 Series

SMT Planar Transformers

规格

端子:

原理图

物理特性

一般规格

焊接/清洗

相关产品系列

Magnetics

B0860-CL Planar Transformer

C1539-AL Planar Transformer

DA2025-AL Planar Transformer

HA3648-BL Planar Transformer

HA4000-AL Planar Transformer

JA4309 Planar Transformer

Magnetics for

B0853-AL SMT Planar Transformer

A9786-AL Planar Magnetics

MA5519-AL Planar Transformer

NA5738-DL SMT Planar Transformer

NA5871-AL 800 W Planar Transformer

PA6605-AL Planar Transformer

PL140 Series

PL160 Series

RA6992-BL SMT Planar Transformer

RA6998 Forward Mode Planar Transformer

RA6999-AL Forward Mode Transformer

RA7040-AL Forward Mode

YA9215-AL 50 W Resonant Transformer

仓库

语言设定

货币设定

PL300 Series

SMT Planar Transformers

所选配置不可用

规格

端子:

原理图

物理特性

一般规格

焊接/清洗

相关产品系列

Magnetics

B0860-CL Planar Transformer

C1539-AL Planar Transformer

DA2025-AL Planar Transformer

HA3648-BL Planar Transformer

HA4000-AL Planar Transformer

JA4309 Planar Transformer

Magnetics for

B0853-AL SMT Planar Transformer

A9786-AL Planar Magnetics

MA5519-AL Planar Transformer

NA5738-DL SMT Planar Transformer

NA5871-AL 800 W Planar Transformer

PA6605-AL Planar Transformer

PL140 Series

PL160 Series

RA6992-BL SMT Planar Transformer

RA6998 Forward Mode Planar Transformer

RA6999-AL Forward Mode Transformer

RA7040-AL Forward Mode

YA9215-AL 50 W Resonant Transformer

警告