DO5010H Series

High Current Surface Mount Power Inductors

Coilcraft DO5010H Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance.

Open magnetic flux path
High saturation current ratings
High energy storage
Industry standard footprint
AEC-Q200 Grade 3 (−40°C to +85°C)

立即购买:

零件号

查找我的元件

计数	单价
1	$2.22
100	$1.91
250	$1.66
500	$1.24
1000	$0.97
2500	$0.77
5000	$0.62

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

M = 20%

Termination

L = Tin-silver

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

设计套件:

套件	电感值	价格
C355	22 (3 of each)	$65.00

规格

Electrical specifications at 25°C.

零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (mΩ) 3	SRF typ (MHz) 4	Isat (mA) 5	Irms (A) 6
零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (mΩ) 3	SRF typ (MHz) 4	Isat (mA) 5	Irms (A) 6
DO5010H-781ML_	0.78	2.6	156	30000	15.0
DO5010H-152ML_	1.5	4.0	100	25000	15.0
DO5010H-222ML_	2.2	6.1	75.0	20000	12.0
DO5010H-332ML_	3.3	8.6	60.0	17000	10.0
DO5010H-392ML_	3.9	10.0	55.0	15000	9.0
DO5010H-472ML_	4.7	14.0	40.0	13000	8.4
DO5010H-602ML_	6.0	17.0	35.0	12000	7.5
DO5010H-782ML_	7.8	18.0	35.0	11000	7.5
DO5010H-103ML_	10	26.0	28.0	10000	6.0
DO5010H-123ML_	12	28.0	26.0	8500	5.2
DO5010H-153ML_	15	32.0	20.0	8000	4.4
DO5010H-223ML_	22	47.0	20.0	7000	3.5
DO5010H-333ML_	33	66.0	15.0	5500	3.0
DO5010H-473ML_	47	86.0	9.0	4500	2.6
DO5010H-683ML_	68	130	8.0	3500	2.3
DO5010H-104ML_	100	190	7.0	3000	1.8
DO5010H-154ML_	150	250	6.0	2600	1.5
DO5010H-224ML_	220	380	5.0	2400	1.2
DO5010H-334ML_	330	560	4.0	1900	1.0
DO5010H-474ML_	470	850	3.0	1400	0.82
DO5010H-684ML_	680	1100	2.0	1200	0.72
DO5010H-105ML_	1000	1800	2.0	1000	0.56

注释

When ordering, please specify termination and packaging codes: e.g. DO5010H-472MLD
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR meter or equivalent.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 8753D network analyzer. Details
Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

端子:

L = RoHS compliant tin-silver (96.5/3.5) over copper.
T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +85°C with Irms current, +85°C to +125°C with derated current

储存温度范围:

Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C

最高元件温度:

+125°C (Ambient + temperature rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs Frequency

Inductance vs Current

Irms Derating

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation‡
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	or
250	330	100	13	38,4	32,4	32	24	4	2	7,8	0,38

‡ Dot or number marking does not indicate polarity

一般规格

核心材料:

Ferrite

重量:

3.2 – 4.0 g

包装:

250 per 13″ reel Plastic tape: 32 mm wide, 0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

DO5010H Series

High Current Surface Mount Power Inductors

规格

端子:

包装: