View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

3D Model Datasheet

GA3416-CL Series

Dual Inductor for Class-D output filters

Coilcraft's GA3416-CL Series uncoupled dual inductors provide two back-to-back inductors that operate independently without coupling effects. This unique design saves space by combining two inductors in a single package. They are perfect for Class-D applications.

Designed for low distortion and best possible sound quality
Shielded SMT package with two coils
Very low magnetic coupling
Additional mounting pads provide excellent board adhesion
AEC-Q200 Grade 1 (−40°C to +125°C)

Electroplated gold (<50 µin) over nickel over phos bronze (additional mounting pads only)

立即购买:

计数	单价
1	$6.78
400	$6.60
800	$5.73
1200	$5.00
2400	$4.30
4800	$3.94

对于大批量采购或非库存产品，点击这里请求报价。

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

规格

Electrical specifications at 25°C.

零件号 1	电感 (µH) 2 (公差: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	Isat (A) 6			Irms (A) 7
零件号 1	电感 (µH) 2 (公差: ±10%)	DCR max (mΩ) 3	SRF typ (MHz) 4	THD+N 5	10% drop	20% drop	30% drop	20°C rise	40°C rise
GA3416-CL_	10	21.0	23.6	<0.2	8.6	8.7	8.8	3.0	4.3

注释

When ordering, please specify termination and packaging codes: e.g. GA3416-CLD
Inductance measured at 500 kHz, 0.5 Vrms, 0 Adc using an Agilent/HP 4284A impedance analyzer.
DCR measured on a micro-ohmmeter at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using Agilent/HP 8753D network analyzer.
Total harmonic distortion + noise measured at 23 W into a 2-Ohm or 4-Ohm load at 1 kHz with a 21 Vdc supply.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Irms: Current applied to both windings at the same time that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

端子:

L = RoHS compliant tin-silver over copper (leads); gold over nickel over phos bronze (additional mounting pads.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

−40°C to +125°C with (40°C) Irms current

储存温度范围:

Component: −40°C to +165°C
Tape and reel packaging: −40°C to +80°C

最高元件温度:

+165°C (Ambient + temperature rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs. Current

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	38,4	32,4	32	20	4	2	12,95	0,4

一般规格

核心材料:

Ferrite

重量:

7.8 g

包装:

200/13″ reel Plastic tape: 32 mm wide, 0.4 mm thick, 20 mm pocket spacing, 12.95 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

GA3416-CL Series

Dual Inductor for Class-D output filters

规格

端子:

包装:

性能曲线

Inductance vs. Current

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

1210uT Series

HA4158-EL and JA4575-BL Series

RA7231 Series

UA8014/UA8013 Series

YA9245-AL, ZA9336-AL

仓库

语言设定

货币设定

GA3416-CL Series

Dual Inductor for Class-D output filters

所选配置不可用

规格

端子:

包装:

性能曲线

Inductance vs. Current

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

1210uT Series

HA4158-EL and JA4575-BL Series

RA7231 Series

UA8014/UA8013 Series

YA9245-AL, ZA9336-AL

警告