数据表索引

登录

View:
介绍
规格
环境
性能曲线
物理特性
焊接/清洗

Datasheet DCDC Tool

GA3199-AL Power Inductor

for ON Semiconductor NCP1654

符合RoHS

• Designed for ON Semiconductor for their 300 Watt, wide mains, PFC stage, driven by the NCP1654 PFC Controller
• Shown as L1 on Application Note AND8324/D
• High inductance: 650 μH; high saturating current: 6.3 A

立即购买:

计数	单价
1	$13.72
250	$11.13
500	$8.51
1000	$6.62
2500	$5.67
5000	$5.21

对于大批量采购或非库存产品，点击这里请求报价。

. 现货，可今天发货.

索取样品:

规格

Electrical specifications at 25°C.

零件号	电感 (µH) 1 (公差: ±10%)	DCR max (mΩ) 2	SRF typ (MHz) 3	Isat (A) 4			Irms (A)
零件号	电感 (µH) 1 (公差: ±10%)	DCR max (mΩ) 2	SRF typ (MHz) 3	10% drop	20% drop	30% drop	20°C rise	40°C rise
GA3199-AL	650	165	770	5.8	6.1	6.3	2.9	3.8

注释

Inductance measured at 10 kHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured on an Agilent/ HP 4192A impedance analyzer or equivalent
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.

包装:

20 per tray

环境

环境:

符合RoHS

环境温度范围:

–40°C to +85°C with (40°C rise) Irms current

储存温度范围:

Component: –40°C to +125°C
Tray packaging: –40°C to +80°C

最高元件温度:

+95°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs Current

Inductance vs Current

物理特性

一般规格

核心材料:

Ferrite

重量:

94 g

包装:

20 per tray

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品族

AGM,AGP,VER

Highest current at high inductance
Exceptionally low DC resistance

DMT

Toroidal shielded TH construction
High inductance and current

LPS

High performance in a low profile
High energy storage and low DC resistance

PS,FS

Highest SRF for their size
Magnetically shielded for low EMI

SER

Proven performance
Rugged SMT construction

XGL

Our latest innovation with lowest DCR
Lowest power consumption

LPZ

Higher inductance values than LPS series
Rugged construction -Some AEC-Q200

RFS

Rugged TH mount construction
Magnetic shielding minimizes EMI

SLR,SLC

Sub-milliohm, low-variation DCR
For multi-phase VRM/VRD/EVRD

XEL

Lower losses vs XAL
Additional sizes and inductance values

MLC

Soft saturation for high peak current
For low-voltage, high-current VRD/VRM

MSS/MOS

Low-loss / Flat inductance vs current
Wide range of industry-standard footprints

SPT

Flat top for surface mounting
Toroid winding for low EMI

XAL

Proven high performance
Benchmark molded power inductor

HCT

High current, low voltage toroid
Either horizontal or vertical mount

MVR

Original Construction for very low DCR
Low loss and soft saturation versions

XFL

Lowest profile in the X family
Height as low as 0.5mm

XAR

Unique Off-board Design
Perfect for modules

EPL

Low Profile
Cost Effective Design

PFL

Ultra small size
Significant current handling