3D Model Datasheet SPICE模型 SPICE DCDC Tool

XGL7015 Series

Ultra-Low Loss Shielded Power Inductors

XGL7015 molded power inductors offer our lowest DC losses and extremely low AC losses for a wide range of DC-DC converters. Additional performance benefits include a wider range of inductance values and improved I_rms current ratings.

Industry's lowest DCR and ultra low AC losses over a wide frequency range
Superior current handling with soft saturation characteristics
AEC-Q200 qualified
Wide inductance range up to 2.2 µH
RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations
COTS Plus tin-silver-copper and tin-lead terminations available

立即购买:

零件号

查找我的元件

计数	单价
1	$2.49
100	$2.18
200	$1.64
400	$0.99
1000	$0.77
2400	$0.65
4800	$0.61

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

M = 20%

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

C = 7" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

规格

Electrical specifications at 25°C. Operating voltage 0 - 80 V

零件号 1	电感 (µH) 2 (公差: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
零件号 1	电感 (µH) 2 (公差: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
XGL7015-201MEC	0.20	3.0	3.5	100	13.3	23.0	33.0	18.2	24.8
XGL7015-381MEC	0.38	4.3	5.1	65	8.6	15.4	23.2	14.7	20.4
XGL7015-561MEC	0.56	6.3	7.5	52	6.6	11.5	17.7	12.9	17.6
XGL7015-821MEC	0.82	9.4	11.2	41	5.5	9.4	14.6	10.7	14.7
XGL7015-102MEC	1.0	10.3	12.3	36	4.9	8.5	13.2	10.3	14.1
XGL7015-152MEC	1.5	16.4	19.6	29	4.1	7.3	11.0	8.1	11.2
XGL7015-222MEC	2.2	25.6	30.7	25	2.9	5.4	8.5	6.2	8.4

注释

When ordering, please specify termination and packaging codes: e.g. XGL7015-222MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

端子:

E = Halogen free component. RoHS compliant tin-silver over copper.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3000 parts per reel). Factory order only, not stocked.

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with (40°C rise) Irms current

储存温度范围:

Component: –55°C to +165°C
Tape and reel packaging: –55°C to +80°C

最高元件温度:

+165°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs Frequency

Inductance vs Current

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	3000*	178/330	60/100	13	22,4	16,4	16	12	4	2	1,65	0,3

* Special order

一般规格

核心材料:

Composite

重量:

0.48 - 0.51 g

包装:

750/7 ″ reel; 3000/13 ″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 1.65 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

仓库

语言设定

货币设定

XGL7015 Series

Ultra-Low Loss Shielded Power Inductors

所选配置不可用

规格

端子:

包装:

性能曲线

Inductance vs Frequency

Inductance vs Current

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

XGL3014 Series

XGL3512 Series

XGL3509, XGL3510 Series

XGL3515 Series

XGL3520 Series

XGL3530 Series

XGL4012 Series

XGL4015 Series

XGL4018 Series

XGL4020 Series

XGL4025 Series

XGL4030 Series

XGL4040 Series

XGL5020 Series

XGL5030 Series

XGL5050 Series

XGL6030 Series

XGL6020 Series

XGL6060 Series

XGL7030 Series

XGL1313 Series

XGL1010 Series

XGL1060 Series

XGL1712 Series

相关产品族

XEL

XAL

XFL

XAR

EPL

PFL

警告