3D Model Datasheet SPICE模型 SPICE DCDC Tool

ZC1818 Series

High Current, High L Shielded Power Inductors

Optimized for the evaluation board STEVAL-L3751V12 from STMicroelectronics
High voltage rating of 85 V – higher than similar parts in the market
Low DCR and soft saturation characteristic for high current applications
AEC-Q200 qualified

立即购买:

计数	单价
1	$9.42
150	$7.69
300	$5.77
600	$3.46
1200	$2.69
2400	$2.31
5000	$2.12

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

M = 20%

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

规格

Electrical specifications at 25°C. Operating voltage 0 — 75 V

零件号	电感 (µH) 1 (公差: ±20%)	DCR (mΩ) 2		SRF typ (MHz) 3	Isat (A) 4			Irms (A) 5
零件号	电感 (µH) 1 (公差: ±20%)	typ	max	SRF typ (MHz) 3	10% drop	20% drop	30% drop	20°C rise	40°C rise
ZC1818-AED	8.2	6.0	7.5	10.8	13.3	22.4	30.0	18.0	24.0

注释

Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

端子:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

−40°C to +125°C with (40°C rise) Irms

储存温度范围:

Component: –40°C to +165°C.
Tape and reel packaging: –55°C to +80°C

最高元件温度:

+165°C (Ambient + temperature rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

L vs Current

L vs Frequency

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
150	330	100	13	38,4	32,4	32	24	4	2	10,26	0,4

一般规格

核心材料:

Composite

重量:

13.1 g

包装:

150/13″ reel Plastic tape: 32 mm wide, 0.4 mm thick, 24 mm pocket spacing, 10.26 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

ZC1818 Series

High Current, High L Shielded Power Inductors

规格

端子:

包装:

性能曲线

L vs Current

L vs Frequency

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

KA5013-AE

XAL1080 Series

XAL40xx Series

XAL5020 Series

XAL50xx Series

XAL6020 Series

XAL60xx Series

XAL7020 Series

XAL7030 Series

XAL7050 Series

XAL7070 Series

XAL8050 Series

XAL8080 Series

XAL1010 Series

XAL1030 Series

XAL1060 Series

XAL1350 Series

XAL1580 Series

XAL1510 Series

XAL1513 Series

相关产品族

XGL

XEL

XFL

XAR

EPL

PFL

仓库

语言设定

货币设定

ZC1818 Series

High Current, High L Shielded Power Inductors

所选配置不可用

规格

端子:

包装:

性能曲线

L vs Current

L vs Frequency

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

KA5013-AE

XAL1080 Series

XAL40xx Series

XAL5020 Series

XAL50xx Series

XAL6020 Series

XAL60xx Series

XAL7020 Series

XAL7030 Series

XAL7050 Series

XAL7070 Series

XAL8050 Series

XAL8080 Series

XAL1010 Series

XAL1030 Series

XAL1060 Series

XAL1350 Series

XAL1580 Series

XAL1510 Series

XAL1513 Series

相关产品族

XGL

XEL

XFL

XAR

EPL

PFL

警告