View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

SER2000 Series

High Current Shielded Power Inductors

SER20xx (SER2000) Series high-current, high-inductance power inductors feature a flat-wire construction, resulting in exceptionally low DC resistance. They come in a wide range of sizes and inductance values for POL, VRM, VRD, and other high power applications.

Rugged flat wire construction
Exceptionally low DC resistance
Ferrite core for flat L vs. I characteristics
Magnetically shielded to minimize EMI
AEC-Q200 qualified

立即购买:

零件号

查找我的元件

计数	单价
1	$3.81
75	$3.27
150	$2.85
300	$2.31
600	$1.39
1200	$1.20
2400	$1.11
5000	$1.01

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

M = 20%

Termination

L = Tin-silver-copper

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

设计套件:

套件	电感值	价格
C374	9 (2 of each)	$60.00

规格

Electrical specifications at 25°C.

零件号 1	电感 (µH) 2 (公差: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
零件号 1	电感 (µH) 2 (公差: ±20%)	typ	max	SRF typ (MHz) 4	Isat (A) 5	20°C rise	40°C rise
SER2009-301ML_	0.30	0.63	0.74	550	100	41.0	54.0
SER2010-301ML_	0.30	0.90	1.0	182	100	36.0	45.0
SER2009-501ML_	0.50	0.63	0.74	544	60	41.0	54.0
SER2010-501ML_	0.50	0.90	1.0	148	81	36.0	45.0
SER2011-501ML_	0.50	1.2	1.3	161	100	30.0	40.0
SER2009-601ML_	0.60	0.63	0.74	648	49	41.0	54.0
SER2010-601ML_	0.60	0.90	1.0	115	70	36.0	45.0
SER2011-601ML_	0.60	1.2	1.3	124	90	30.0	40.0
SER2012-601ML_	0.60	1.4	1.6	115	97	25.0	35.0
SER2009-681ML_	0.68	0.63	0.74	454	45	41.0	54.0
SER2010-681ML_	0.68	0.90	1.0	136	62	36.0	45.0
SER2011-681ML_	0.68	1.2	1.3	135	78	30.0	40.0
SER2012-681ML_	0.68	1.4	1.6	103	85	25.0	35.0
SER2013-681ML_	0.68	1.7	1.8	104	98	23.0	30.0
SER2009-801ML_	0.80	0.63	0.74	567	38	41.0	54.0
SER2010-801ML_	0.80	0.90	1.0	92	53	36.0	45.0
SER2011-801ML_	0.80	1.2	1.3	113	70	30.0	40.0
SER2012-801ML_	0.80	1.4	1.6	91	75	25.0	35.0
SER2013-801ML_	0.80	1.7	1.8	93	85	23.0	30.0
SER2014-801ML_	0.80	1.9	2.2	104	98	21.0	27.0
SER2009-901ML_	0.90	0.63	0.74	557	33	41.0	54.0
SER2010-901ML_	0.90	0.90	1.0	96	48	36.0	45.0
SER2011-901ML_	0.90	1.2	1.3	104	62	30.0	40.0
SER2012-901ML_	0.90	1.4	1.6	85	69	25.0	35.0
SER2013-901ML_	0.90	1.7	1.8	98	73	23.0	30.0
SER2014-901ML_	0.90	1.9	2.2	102	87	21.0	27.0
SER2009-102ML_	1.0	0.63	0.74	488	29	41.0	54.0
SER2010-102ML_	1.0	0.90	1.0	81	42	36.0	45.0
SER2011-102ML_	1.0	1.2	1.3	97	56	30.0	40.0
SER2012-102ML_	1.0	1.4	1.6	75	64	25.0	35.0
SER2013-102ML_	1.0	1.7	1.8	98	68	23.0	30.0
SER2014-102ML_	1.0	1.9	2.2	88	70	21.0	27.0
SER2009-122ML_	1.2	0.63	0.74	81	28	41.0	54.0
SER2010-122ML_	1.2	0.90	1.0	69	37	36.0	45.0
SER2011-122ML_	1.2	1.2	1.3	81	49	30.0	40.0
SER2012-122ML_	1.2	1.4	1.6	73	54	25.0	35.0
SER2013-122ML_	1.2	1.7	1.8	82	58	23.0	30.0
SER2014-122ML_	1.2	1.9	2.2	78	63	21.0	27.0
SER2009-202ML_	2.0	0.63	0.74	40	16	41.0	54.0
SER2010-202ML_	2.0	0.90	1.0	48	27	36.0	45.0
SER2011-202ML_	2.0	1.2	1.3	56	37	30.0	40.0
SER2012-202ML_	2.0	1.4	1.6	51	35	25.0	35.0
SER2013-202ML_	2.0	1.7	1.8	61	40	23.0	30.0
SER2014-202ML_	2.0	1.9	2.2	62	45	21.0	27.0
SER2013-362ML_	3.6	1.7	1.8	38	25	23.0	30.0
SER2013-402ML_	4.0	1.7	1.8	35	20	23.0	30.0
SER2014-402ML_	4.0	1.9	2.2	36	25	21.0	27.0
SER2013-472ML_	4.7	1.7	1.8	30	18	23.0	30.0

注释

When ordering, please specify termination and packaging codes: e.g. SER2000-132MLD
Inductance measured at 100 kHz, 0.1 Vrms, using an Agilent/HP 4263B or equivalent.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A network analyzer and an Agilent/HP 16092A test fixture. Details
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves. When Irms is greater than Isat,Isat is the more critical specification and Irms is shown in gray type. See temperature rise vs Current.

端子:

L = RoHS compliant tin-silver-copper (96.5/3.5) over copper.
S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +85°C with (40°C rise) Irms

储存温度范围:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise).

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Temperature Rise vs. Current

原理图

物理特性

卷装规格

	Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)
	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
SER2009	200	330	100	13	50,4	44,4	44	32	4	2	9,25	0,4
SER2010	200	330	100	13	50,4	44,4	44	32	4	2	10,5	0,4
SER2011	170	330	100	13	50,4	44,4	44	32	4	2	11,6	0,4
SER2012	150	330	100	13	50,4	44,4	44	32	4	2	13,0	0,4
SER2013	150	330	100	13	50,4	44,4	44	32	4	2	14,0	0,4
SER2014	125	330	100	13	50,4	44,4	44	32	4	2	15,0	0,5

一般规格

核心材料:

Ferrite

重量:

SER2009 = 6.65 – 6.89 g; SER2010 = 7.46 – 7.90 g; SER2011 = 8.63 – 9.08 g; SER2012 = 9.92 – 10.3 g; SER2013 = 10.8 – 11.4 g; SER2014 = 11.7 – 12.4 g

包装:

SER2009: 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 9.25 pocket depth
SER2010: 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 10.5 pocket depth
SER2011: 170 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.6 pocket depth
SER2012: 150 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 13.0 pocket depth
SER2013: 150 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 14.0 pocket depth
SER2014: 125 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 15.0 pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

仓库

语言设定

货币设定

SER2000 Series

High Current Shielded Power Inductors

所选配置不可用

规格

端子:

包装:

性能曲线

Temperature Rise vs. Current

Inductance vs. Current

Inductance vs. Frequency

Inductance vs. Current

Inductance vs. Frequency

Inductance vs. Current

Inductance vs. Frequency

Inductance vs. Current

Inductance vs. Frequency

Inductance vs. Current

Inductance vs. Frequency

Inductance vs. Current

Inductance vs. Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

D1787 Series

SER1052 Series

SER1360 Series

SER1390 Series

SER14xx Series

SER1512 Series

SER1590 Series

SER2211 Series

SER29xx Series

SER3018H Series

SER80xx Series

相关产品族

AGM,AGP,VER

SLR,SLC

MLC

MVR

警告