3D Model Datasheet SPICE模型 SPICE DCDC Tool

LPS3030 Series

Shielded Power Inductors

Small shielded power inductor – only 3.0 × 3.0 × 3.0 mm high
Handles current up to 0.70 A
RoHS-compliant, halogen free. 260°C compatible. Matte tin over nickel over silver terminations
AEC-Q200 Grade 1 (−40°C to +125°C)
COTS Plus tin-silver-copper and tin-lead terminations available

立即购买:

零件号

查找我的元件

计数	单价
1	$1.48
250	$1.13
600	$0.65
1200	$0.52
2500	$0.44
5000	$0.41

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

M = 20%

Termination

R = Matte tin over nickel over silver

Packaging

C = 7" machine-ready reel

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

设计套件:

套件	电感值	价格
C485	17 (3 of each)	$65.00

规格

Electrical specifications at 25°C.

零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
LPS3030-103	10	0.15	42.8	0.64	0.68	0.70	0.90	1.2
LPS3030-153	15	0.24	35.7	0.54	0.56	0.60	0.75	1.0
LPS3030-183	18	0.27	26.1	0.50	0.52	0.54	0.70	0.90
LPS3030-223	22	0.31	26.0	0.42	0.46	0.48	0.65	0.85
LPS3030-333	33	0.39	19.6	0.36	0.40	0.42	0.60	0.80
LPS3030-473	47	0.58	14.6	0.32	0.32	0.33	0.50	0.65
LPS3030-683	68	0.73	12.1	0.24	0.26	0.27	0.45	0.62
LPS3030-104	100	1.1	9.8	0.21	0.22	0.23	0.35	0.46
LPS3030-124	120	1.4	8.7	0.19	0.20	0.21	0.32	0.42
LPS3030-154	150	1.9	7.4	0.17	0.18	0.19	0.26	0.34
LPS3030-184	180	2.1	7.0	0.16	0.16	0.17	0.24	0.32
LPS3030-224	220	2.5	6.0	0.14	0.15	0.16	0.22	0.30
LPS3030-334	330	4.3	4.9	0.11	0.12	0.13	0.18	0.23
LPS3030-474	470	5.6	4.1	0.10	0.10	0.11	0.16	0.20
LPS3030-564	560	7.9	3.3	0.080	0.090	0.10	0.12	0.16
LPS3030-684	680	8.9	2.9	0.070	0.080	0.090	0.11	0.15
LPS3030-824	820	10.9	2.9	0.060	0.070	0.080	0.10	0.14

注释

When ordering, please specify termination and packaging codes: e.g. LPS3030-824MRC
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A impedance analyzer or equivalent. Inductance at 1 MHz is the same for parts with SRF >10 MHz.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES or equivalent.
Isat: DC current at which the inductance drops the specified amount from its value without current. Details
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

端子:

R = RoHS compliant matte tin over nickel over silver.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2000 parts per full reel).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with (40°C rise) Irms current

储存温度范围:

Component: –40°C to +165°C
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+165°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs. Frequency

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2000*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,3	0,3

* Special order

一般规格

核心材料:

Ferrite

重量:

80 – 90 mg

包装:

600/7″ reel; 2000/13″ reel; Plastic tape: 12 mm wide, 0.30 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycle

焊接之前，请参阅焊接线艺元件。

推荐的取放吸嘴:

OD: 3 mm; ID: ≤ 1.5 mm

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPS3030 Series

Shielded Power Inductors

规格

端子:

包装:

性能曲线

Inductance vs. Frequency

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

LPS3008 Series

LPS3010 Series

LPS3015 Series

LPS3314 Series

LPS4012 Series

LPS4010 Series

LPS4018 Series

LPS4040 Series

LPS4414 Series

LPS5010 Series

LPS5015 Series

LPS5030 Series

LPS5050 Series

LPS6225 Series

LPS6235 Series

LPS8045B Series

PA6594-AE Series

相关产品族

LPZ

MSS/MOS

仓库

语言设定

货币设定

LPS3030 Series

Shielded Power Inductors

所选配置不可用

规格

端子:

包装:

性能曲线

Inductance vs. Frequency

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

LPS3008 Series

LPS3010 Series

LPS3015 Series

LPS3314 Series

LPS4012 Series

LPS4010 Series

LPS4018 Series

LPS4040 Series

LPS4414 Series

LPS5010 Series

LPS5015 Series

LPS5030 Series

LPS5050 Series

LPS6225 Series

LPS6235 Series

LPS8045B Series

PA6594-AE Series

相关产品族

LPZ

MSS/MOS

警告