View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

3D Model Datasheet

MSD1038V-223

Name: MSD1038V-223MEC
Brand: Coilcraft
SKU: MSD1038V-223MEC
Price: 1.11 USD
Availability: InStock

MSD1038V-223MEC

有关该元件的更多信息和规格。

前往系列

立即购买:

计数	单价
1	$3.90
100	$3.19
250	$2.39
500	$1.43
1000	$1.11
2500	$0.96
5000	$0.88

对于大批量采购或非库存产品，点击这里请求报价。

Termination

E = Matte tin over nickel over phos bronze

Packaging

C = 7" machine-ready reel

Tolerance

K = 10%

. 现货，可今天发货.

索取样品:

规格

Electrical specifications at 25°C.

反激式应用

零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	隔离电压 (V)	漏电感 (nH) 5	匝数比
零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	隔离电压 (V)	漏电感 (nH) 5	匝数比
MSD1038V-223ME_	22	0.240	2250	700	1 : 1

SEPIC应用

零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	耦合系数	漏电感 (nH) 5	Isat (A) 6	Irms (A)
零件号 1	电感 (µH) 2 (公差: ±20%)	DCR max (Ω) 3	耦合系数	漏电感 (nH) 5	Isat (A) 6	两个绕组 7	一个绕组 8
MSD1038V-223ME_	22	0.240	≥0.96	700	3.1	1.3	1.8

注释

When ordering, please specify termination and packaging codes: e.g. MSD1038V-154KEC
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage Inductance is for L1 and is measured with L2 shorted.
DC current at 25°C that causes a 30% (typ) inductance drop from its value without current. It is the sum of the current flowing in both windings.
Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.
Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. To predict temperature rise go to online calculator.

端子:

E = RoHS compliant matte tin over nickel over phos bronze.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape. (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel)

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with Irms current.

储存温度范围:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+165°C (ambient + temp rise).

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs Current

Inductance vs. Frequency

原理图

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	30,4	24,4	24	16	4	2	4,3	0,35

* Special order

一般规格

核心材料:

Ferrite

重量:

1.2– 1.5 g

包装:

250/7″ reel; 1000/13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.3 mm pocket depth.

Winding to Winding Isolation:

2250 Vrms, one minute

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

MSD1038V-223

MSD1038V-223MEC