View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

3D Model Datasheet

MSD1278H-334

Name: MSD1278H-334KED
Brand: Coilcraft
SKU: MSD1278H-334KED
Price: 0.95 USD
Availability: InStock

MSD1278H-334KED

有关该元件的更多信息和规格。

前往系列

立即购买:

计数	单价
1	$3.06
250	$2.02
500	$1.21
1000	$0.95
2500	$0.81
5000	$0.75

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

K = 10%

Termination

E = Matte tin over nickel over phos bronze

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

设计套件:

套件	电感值	价格
C512	28 (3 of each)	$85.00

规格

Electrical specifications at 25°C.

反激式应用

零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	DCR max (Ω) 3	隔离电压 (V)	漏电感 (µH) 5
零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	DCR max (Ω) 3	隔离电压 (V)	漏电感 (µH) 5
MSD1278H-334KED	330.00	0.82	500	3.40

SEPIC应用

零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	耦合系数	漏电感 (µH) 5	Isat (A) 6			Irms (A)
零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	DCR max (Ω) 3	SRF typ (MHz) 4	耦合系数	漏电感 (µH) 5	10% drop	20% drop	30% drop	两个绕组 7	一个绕组 8
MSD1278H-334KED	330	0.82	2.8	0.99	3.4	1.3	1.4	1.6	0.83	1.16

注释

When ordering, please specify termination code: MSD1278H-105KED.
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage inductance is for L1 and is measured with L2 shorted
Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. Determine temperature rise.
Irms, one winding: Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. Determine temperature rise.

端子:

E = RoHS compliant matte tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with Irms current

储存温度范围:

Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+165°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	330	100	13	30,4	24,4	24	16	4	2	8,7	0,5

一般规格

核心材料:

Ferrite

重量:

3.7 – 4.4 g

包装:

500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 8.7 mm pocket depth

Winding to Winding Isolation:

500 Vrms, one minute

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

PCB washing Tested with pure water or alcohol only. More info.

仓库

语言设定

货币设定

MSD1278H-334

MSD1278H-334KED

分享该元件

所选配置不可用

规格

反激式应用

SEPIC应用

端子:

包装:

性能曲线

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品

MSD1278H-103

MSD1278H-104

MSD1278H-105

MSD1278H-123

MSD1278H-124

MSD1278H-153

MSD1278H-154

MSD1278H-183

MSD1278H-184

MSD1278H-223

MSD1278H-224

MSD1278H-273

MSD1278H-274

MSD1278H-333

MSD1278H-393

MSD1278H-394

MSD1278H-472

MSD1278H-473

MSD1278H-474

MSD1278H-563

MSD1278H-564

MSD1278H-652

MSD1278H-683

MSD1278H-684

MSD1278H-822

MSD1278H-823

MSD1278H-824

警告