View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

3D Model Datasheet

MSD1583-104

Name: MSD1583-104MED
Brand: Coilcraft
SKU: MSD1583-104MED
Price: 1.56 USD
Availability: InStock

MSD1583-104KED, MSD1583-104MED

有关该元件的更多信息和规格。

前往系列

立即购买:

计数	单价
1	$3.95
300	$2.59
600	$1.56
1200	$1.21
2400	$1.04
4800	$0.96

对于大批量采购或非库存产品，点击这里请求报价。

Termination

E = Matte tin over nickel

Packaging

D = 13" machine-ready reel

Tolerance

M = 20%

K = 10%

. 现货，可今天发货.

索取样品:

设计套件:

套件	电感值	价格
C463	41 (3 of each)	$160.00

规格

Electrical specifications at 25°C.

反激式应用

零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	DCR (Ω) 3		隔离电压 (V)	漏电感 (nH) 5	匝数比
零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	typ	max	隔离电压 (V)	漏电感 (nH) 5	匝数比
MSD1583-104KE_	100	0.23	0.26	500	590	1 : 1

SEPIC应用

零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	DCR (Ω) 3		SRF typ (MHz) 4	耦合系数	漏电感 (nH) 5	Isat (A) 6			Irms (A)
零件号 1 (Hover for schematics)	电感 (µH) 2 (公差: ±10%)	typ	max	SRF typ (MHz) 4	耦合系数	漏电感 (nH) 5	10% drop	20% drop	30% drop	两个绕组 7	一个绕组 8
MSD1583-104KE_	100	0.23	0.26	5.1	>0.99	590	3.7	4.2	4.6	1.2	1.8

注释

When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
For SEPIC: When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
For SEPIC: When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage inductance is for L1 and is measured with L2 shorted.
Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

端子:

E = Halogen free component. RoHS compliant matte tin over nickel over phos bronze terminations.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +85°C with (40°C rise) Irms current

储存温度范围:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs Current

Inductance vs. Frequency

原理图

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
300	330	100	13	38,4	32,4	32	24	4	2	8,6	0,5

一般规格

核心材料:

Ferrite

重量:

3.7 – 4.4 g

包装:

300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 8.6 mm pocket depth.

Winding to Winding Isolation:

500 Vrms, one minute

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested with pure water or alcohol only. More info.

MSD1583-104

MSD1583-104KED, MSD1583-104MED