View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

LPD5030 Series

Common Mode Chokes

Coilcraft LPD5030 Series common mode chokes provide both common mode and differential mode filtering in a single miniature, low-profile device.

Low-profile miniature CM choke; measures only 4.8 mm square and 2.9 mm high
Common mode and differential mode filtering in a single device
Up to 490 MHz differential mode cutoff frequency
100 Vrms, one minute winding-to-winding isolation
AEC-Q200 Grade 3 (−40°C to +85°C)

Refer to Designing Common Mode Filters for design guidance.

Need parts for space, military or other critical applications?
See Coilcraft AR466PJD Series | See Coilcraft ML466PJD Series | See Coilcraft MS466PJD Series | See Coilcraft ST466PJD Series

立即购买:

零件号

查找我的元件

计数	单价
1	$1.14
375	$0.95
750	$0.65
1500	$0.55
3000	$0.45
6000	$0.42

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

N = 30%

Termination

R = Matte tin over nickel over silver

Packaging

C = 7" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

规格

Electrical specifications at 25°C.

零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (A) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (A) 4	DCR max (Ω) 5	隔离电压 (Vrms) 6
LPD5030-571NR_	2	0.47 @ 250 MHz	490	0.40	2.30	0.031	100
LPD5030-781NR_	2	0.69 @ 210 MHz	400	0.55	2.25	0.038	100
LPD5030-102NR_	2	1.03 @ 150 MHz	380	0.80	2.20	0.042	100
LPD5030-152MR_	2	1.48 @ 110 MHz	260	1.2	2.05	0.048	100
LPD5030-222MR_	2	1.90 @ 93.0 MHz	260	1.8	1.95	0.067	100
LPD5030-332MR_	2	3.84 @ 66.0 MHz	210	2.6	1.70	0.077	100
LPD5030-472MR_	2	4.34 @ 53.0 MHz	190	3.8	1.40	0.111	100
LPD5030-562MR_	2	6.28 @ 45.0 MHz	140	4.5	1.35	0.125	100
LPD5030-682MR_	2	7.10 @ 43.0 MHz	140	5.4	1.20	0.159	100
LPD5030-103MR_	2	11.58 @ 36.0 MHz	110	8.0	1.05	0.210	100
LPD5030-153MR_	2	16.01 @ 26.0 MHz	87.0	12	0.85	0.298	100
LPD5030-223MR_	2	20.32 @ 21.0 MHz	65.0	18	0.70	0.452	100
LPD5030-333MR_	2	34.28 @ 19.0 MHz	67.0	26	0.60	0.565	100
LPD5030-473MR_	2	37.00 @ 13.0 MHz	50.0	38	0.50	0.806	100
LPD5030-683MR_	2	47.73 @ 11.0 MHz	42.0	54	0.43	1.130	100
LPD5030-104MR_	2	74.28 @ 8.7 MHz	34.0	80	0.33	1.790	100
LPD5030-154MR_	2	83.32 @ 7.2 MHz	27.0	120	0.28	2.430	100
LPD5030-224MR_	2	119.70 @ 5.8 MHz	20.0	176	0.24	3.300	100
LPD5030-334MR_	2	180.50 @ 4.3 MHz	18.0	264	0.18	5.360	100
LPD5030-474MR_	2	231.10 @ 3.6 MHz	16.0	376	0.15	7.510	100
LPD5030-684MR_	2	285.90 @ 3.2 MHz	13.0	544	0.13	10.800	100
LPD5030-105MR_	2	355.20 @ 2.5 MHz	11.0	800	0.10	16.500	100

注释

When ordering, please specify termination and packaging codes: e.g. LPD5030-224MRC
Frequency at which the differential mode attenuation equals 3 dB
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Interwinding isolation (hipot) tested for one minute.

端子:

R = Matte tin over nickel over silver.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +85°C with Irms current

储存温度范围:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,1	0,32

* Special order

一般规格

核心材料:

Ferrite

重量:

210 – 225 mg

Winding to Winding Isolation:

100 Vrms, one minute

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

推荐的取放吸嘴:

OD: 5 mm; ID: ≤ 2.5 mm

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPD5030 Series

Common Mode Chokes

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD6235 Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

PFD2015 Series

PFD3215 Series

相关产品族

Cx - Up to 10 A

仓库

语言设定

货币设定

LPD5030 Series

Common Mode Chokes

所选配置不可用

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD6235 Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

PFD2015 Series

PFD3215 Series

相关产品族

Cx - Up to 10 A

警告