View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

Datasheet 3D模型

M2022 Series

Common Mode EMI/RFI Filter

Our M2022 Series common mode EMI/RFI filters provide both common-mode and differential-mode filtering in a single 1812-size surface mount package. They are available in standard (-AL), low-profile (-ALPL) and shielded (-ASL) versions, all offering excellent isolation, environmental stability and low cost.

Common mode and differential mode filtering in a single device
Compact 1812-size surface mount package
Standard (-AL), low profile (-ALPL) and shielded (-ASL) versions available
Excellent isolation, environmental stability and low cost
RoHS-compliant. 260°C compatible. Gold over nickel over moly-manganese terminals

Refer to Designing Common Mode Filters for design guidance.

立即购买:

零件号

查找我的元件

计数	单价
1	$2.08
300	$1.59
600	$1.19
1200	$0.88
2400	$0.68
4800	$0.52

对于大批量采购或非库存产品，点击这里请求报价。

Termination

L = Gold over nickel over moly-manganese

Packaging

C = 7" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

规格

Electrical specifications at 25°C.

零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (mA)	DCR max (mΩ) 4	隔离电压 (Vrms) 5
零件号 1	线组数	共模峰值阻抗 (kΩ)	截止频率 (MHz) 2	最小电感 (µH) 3	Irms (mA)	DCR max (mΩ) 4	隔离电压 (Vrms) 5
M2022-AL_	2	38.3 @ 120 MHz	170	3.8	500	800	50
M2022-ALPL_	2	40.0 @ 160 MHz	120	3.6	500	990	50
M2022-ASL_	2	32.0 @ 66.0 MHz	140	11.5	500	850	50

注释

When ordering, please specify packaging codes: e.g. M2022-ALC, M2022-ALPLC, or M2022-ASLC.
Frequency at which the differential mode attenuation equals 3 dB
Inductance is per winding, measured at 10 MHz.
DCR is per winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Winding to winding isolation (hipot) tested for one minute.

端子:

RoHS compliant gold over nickel over moly-manganese.

包装:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +85°C

储存温度范围:

Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

M2022-A, M2022-ALP

M2022-AS
m2022as-(1).gif

	A max	B max	C max	D ref	E ref	F ref	G min	H
M2022-AL	0.195	0.150	0.135	0.070	0.100	0.178	0.04	0.03
M2022-AL	4,95	3,81	3,43	1,78	2,54	4,52	1,02	0,76
M2022-ALPL	0.195	0.150	0.079	0.070	0.100	0.178	0.04	0.03
M2022-ALPL	4,95	3,81	2,01	1,78	2,54	4,52	1,02	0,76
M2022-ASL	0.231	0.196	0.150	0.107	0.100	0.178	0.04	0.03
M2022-ASL	5,87	4,98	3,81	2,72	2,54	4,52	1,02	0,76

卷装规格

Parts per reel			Reel dimensions (mm)					Tape dimensions (mm)
	7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
M2022-AL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,7	0,3
M2022-ALPL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,25	0,3
M2022-ASL	600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,94	0,25

* Special order

一般规格

核心材料:

Ferrite

重量:

M2022-AL 155 mg; M2022-ALPL 85.5 mg; M2022-ASL 319 mg

包装:

600 per 7″ reel; 2200 per 13″ reel
Plastic tape: 12 mm wide, 8 mm pocket spacing
M2022-AL: 0.3 mm thick, 3.7 mm pocket depth
M2022-ALP: 0.3 mm thick, 2.25 mm pocket depth
M2022-AS: 0.25 mm thick, 3.94 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

M2022 Series

Common Mode EMI/RFI Filter

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

CJ5100

CQ7584

CR7856

DFT4532 Series

PFD2015 Series

PFD3215 Series

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD5030 Series

LPD5030V Series

LPD6235 Series

PDLF Series

DFT7160 Series

CDF Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

DLF Series

仓库

语言设定

货币设定

M2022 Series

Common Mode EMI/RFI Filter

所选配置不可用

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

CJ5100

CQ7584

CR7856

DFT4532 Series

PFD2015 Series

PFD3215 Series

LPD3015 Series

LPD4012 Series

LPD5010 Series

LPD5030 Series

LPD5030V Series

LPD6235 Series

PDLF Series

DFT7160 Series

CDF Series

MSD1048 Series

MSD1260 Series

MSD1260T Series

MSD1278 Series

MSD1514 Series

MSD1583 Series

MSD7342 Series

DLF Series

警告