View:
介绍
规格
环境
性能曲线
原理图
物理特性
卷装
焊接/清洗

1812CAN Series

Common Mode Choke

Our 1812CAN Series filters a broad frequency range of common mode noise with 50% lower DCR and higher current handling than other CANbus chokes in the market. They are designed for common mode noise suppression on CAN or CAN FD lines in automotive or general industrial automation applications, and can also be used for FlexRay automotive bus systems.

Inductance values from 11 µH to 100 µH
Filters a broad frequency range of common mode noise
50% lower DCR and higher current handling than other CANbus chokes in the market
Designed for common mode noise suppression on CAN or CAN FD
in automotive or general industrial automation applications
Can be used for FlexRay automotive bus system
Low profile 1812 footprint: 4.95 × 3.18 × 3.0 mm
AEC-Q200 Grade 1 (−40°C to +125°C)

Need parts for space, military or other critical applications?
See Coilcraft ST450FRC Series

立即购买:

零件号

查找我的元件

计数	单价
1	$1.48
100	$1.35
250	$1.22
500	$1.10
1000	$0.97
2500	$0.84
5000	$0.71

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

N = 30%

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

B = Less than full reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

规格

Electrical specifications at 25°C.

零件号 1	线组数	电感 (µH) 2 (公差: ±30%)	Irms (mA) 3	DCR max (Ω) 4	隔离电压 (Vrms) 5
零件号 1	线组数	电感 (µH) 2 (公差: ±30%)	Irms (mA) 3	DCR max (Ω) 4	隔离电压 (Vrms) 5
1812CAN-113NR_	2	11	460	0.27	250
1812CAN-223NR_	2	22	400	0.4	250
1812CAN-513NR_	2	51	300	0.59	250
1812CAN-104NR_	2	100	260	1.0	250

注释

When ordering, please specify packaging code: e.g. 1812CAN-104NRC
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter and a Coilcraft CCF 1113 fixture.
Equal current when applied to each winding simultaneously that causes a 25°C temperature rise from 125°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding, measured 25°C on a Keithley 580 micro-ohmmeter and a Coilcraft CCF 858 fixture. For other operating temperatures, use this DCR at Temperature calculator.
Winding to winding isolation (hipot) tested for one minute.

端子:

RoHS compliant matte tin over nickel over silverpalladium-glass frit.

包装:

C = 7" machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel).

环境

环境:

符合RoHS , 无卤素

环境温度范围:

–40°C to +125°C with Irms current

储存温度范围:

Component: –40°C to +150°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+150°C

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,05	0,3

* Special order

一般规格

核心材料:

Ferrite

重量:

120 – 130 mg

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

1812CAN Series

Common Mode Choke

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

1210CAN Series

仓库

语言设定

货币设定

1812CAN Series

Common Mode Choke

所选配置不可用

规格

端子:

包装:

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

1210CAN Series

警告