View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

Datasheet S-Param 3D 모델

WBC4-6TL

Name: WBC4-6TLC
Brand: Coilcraft
SKU: WBC4-6TLC
Price: 2.38 USD
Availability: InStock

WBC4-6TLC

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$3.18
375	$2.73
750	$2.38
1500	$1.85
3000	$1.58
6000	$1.46

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

설계자용 키트:

키트	값	가격
C393	12 (3 of each)	$45.00

사양

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

부품 번호 1 (Hover for schematics)	권선당 최소 L (µH) 2		테스트 주파수 (kHz)	DCR max (mΩ) 3		Imp. ratio pri:sec 4	전류정격 (mA)	삽입 손실 (db)	직류 불균형 5	대역폭 (MHz)	절연 전압 (Vrms)	회로도	컬러 도트
부품 번호 1 (Hover for schematics)	Pri	Sec	테스트 주파수 (kHz)	Pri	Sec	Imp. ratio pri:sec 4	전류정격 (mA)	삽입 손실 (db)	직류 불균형 5	대역폭 (MHz)	절연 전압 (Vrms)	회로도	컬러 도트
WBC4-6TL_	9.0	36	100	80.0	200	1 : 4	250	0.65	7.5	0.3 — 700	300	B	Blue

메모

When ordering, please specify termination and packaging codes: e.g. WBC16-1TLC
Inductance measured at 100 kHz, 0.1 V, 0 Adc on an Agilent/ HP 4192 or equivalent.
DCR measured at 25°C on a micro-ohmmeter. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Impedance ratio is for the full primary winding to the full secondary winding.
DC imbalance is the maximum difference in current measured at pins 1 and 3 with the source at pin 2. Inductance drop is 15% at maximum imbalance.

종단 처리:

L = RoHS compliant tin-silver-copper (95.5/4/0.5) over silver-platinum-glass frit.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +85°C

보관 온도 범위:

Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Frequency Response

Measured on a network analyzer (re: 50 Ohms)

Imbalance Curve

Measured on a network analyzer (re: 50 Ohms)

회로도

A	B	C	D

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	2500*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,9	0,3

* Special order

일반 사양

코어 소재:

Ferrite

중량:

68.0 – 88.8 mg

패키지:

750/7″reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.9 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

WBC4-6TL

WBC4-6TLC