사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

POE300F-24

POE300F-24LD

RoHS 준수

부품에 대한 추가 정보 및 사양.

시리즈로 이동
지금 구매:
개수 단품 가격
1 $3.98
175 $3.66
700 $3.37
1400 $2.82
2800 $2.55
5000 $2.33

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C398 5 (3 of each) $50.00

사양

Electrical specifications at 25°C.

부품 번호 1
(Hover for schematics)
전력 (W) 인덕턴스
@ 0A (µH) 2
(허용 오차: ±10%)
인덕턴스
최소 @   2.6 A (µH) 3
DCR max (Ω) 4 누설
인덕턴스
최대 (µH) 5
권수비 6 절연
전압 (Vrms) 7
이차
출력 (V, A) 8
Pri Sec Aux Pri : Sec : Aux
POE300F-24L_ 30 42.0 37.8 0.060 0.055 0.195 0.310 1 : 0.67 : 0.33 1500 24 V , 1.25 A
메모
  1. When ordering, please specify packaging code: e.g. POE300F-24LD
  2. Inductance is for the primary, measured at 250 kHz, 0.7 Vrms, 0 Adc.
  3. Ipk is the peak primary current drawn at minimum input voltage.
  4. DCR is with the windings connected in parallel, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  5. Leakage inductance is for the primary with the secondary windings shorted.
  6. Turns ratio is with the primary and the secondary windings connected in parallel.
  7. Isolation: 1500 Vrms primary to secondary; 500 Vrms primary to auxiliary.
  8. Output is with the secondary windings connected in parallel. Output of the auxiliary winding is 12 V.

종단 처리:

  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

패키지:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (175 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
−40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

poe300s.gif

The primary windings and the
secondary windings are to be
connected in parallel on the PC board.

물리적 특성

poe300d.gif

dims_inches_mm-(3).gif

테이프 및 릴 사양

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
175 330 100 13 50,4 44,4 44 32 4 2 11,9 0,4

일반 사양

코어 소재:
Ferrite
중량:
11.9 g
패키지:
175 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.9 mm pocket depth

관련 제품

관련 제품 시리즈