사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

GA3429-BL Flyback Transformer

for Linear Technology LT3573

RoHS 준수
  • Developed for Linear Technology LT3573 Isolated Flyback Converter
  • Can also be used in PoE applications
  • Bias winding provides power to the chipset

지금 구매:
개수 단품 가격
1 $3.42
250 $2.92
500 $2.55
1000 $2.00
2500 $1.71
5000 $1.56

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Analog Devices LT3573와(과) 호환

입력 전압 출력 1 전력 FSW
Sec Bias
20 V 28 V 3.3 V , 1.5 A 3.3 V , 0.02 A 5 W 250 kHz

사양

Electrical specifications at 25°C.

부품 번호 2
(Hover for schematics)
인덕턴스
@ 0A (µH) 3
(허용 오차: ±10%)
인덕턴스
최소 @   2.1 A (µH)
DCR max (mΩ) 4 누설
인덕턴스
최대 (µH) 5
권수비 6 절연
전압 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
GA3429-BL_ 24.0 21.6 95.0 7.5 123 0.566 1 : 0.25 : 0.25 1500
메모
  1. Output is with the secondary windings connected in parallel. Bias winding output: 3.3 V, 20 mA.
  2. When ordering, please specify packaging code: GA3429-BLD.
  3. Inductance is for the primary, measured at 250 kHz, 0.3 Vrms, 0 Adc.
  4. DCR for the secondary is per winding.
  5. Leakage inductance measured between pins 3 and 4 with all secondary pins shorted.
  6. Turns ratio is with the secondary windings connected in parallel.
  7. 1500 Vrms isolation from primary and bias to secondary;
    500 Vrms isolation from primary to bias, tested for one minute.

종단 처리:

  • RoHS-compliant. 260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

패키지:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

ga3429s.gif

Secondary windings to be connected
in parallel on the PC board

물리적 특성

ga3429d.gif

dims_inches_mm-(5).gif

테이프 및 릴 사양

tapereel_pl-(42).gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_f-(1).gif
250 330 100 13 38,4 32,4 32 20 4 2 11,2 0,5

일반 사양

코어 소재:
Ferrite
중량:
3.9 to 4.1 g
패키지:
250 per 13″ reel Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11.2 mm pocket depth.

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf

관련 제품 시리즈