사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

GA3271-AL

GA3271-ALD

RoHS 준수

부품에 대한 추가 정보 및 사양.

시리즈로 이동
지금 구매:
개수 단품 가격
1 $3.78
200 $3.24
600 $2.82
1200 $2.20
2400 $1.89
5000 $1.73

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Maxim MAX5941B와(과) 호환

입력 전압 출력 1 전력 FSW
Sec Bias
30 V 60 V 12 V , 1 A 15 V , 0.02 A 13 W 275 kHz

사양

Electrical specifications at 25°C.

부품 번호 2
(Hover for schematics)
인덕턴스
@ 0A (µH) 3
(허용 오차: ±10%)
인덕턴스
최소 @   1 A (µH)
DCR max (Ω) 4 누설
인덕턴스
최대 (µH) 5
권수비 6 절연
전압 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
GA3271-AL_ 117.5 104.0 0.201 0.060 0.335 0.815 1 : 0.457 : 0.571 1500
메모
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 15 V, 20 mA
  2. When ordering, please specify termination and packaging codes: GA3271-ALD.
  3. Inductance is for the primary, measured at 250 kHz, 0.1 Vrms.
  4. DCR for the primary and for the secondary are with the windings connected in parallel.
  5. Leakage inductance is for the primary windings with the secondary windings shorted.
  6. Turns ratios are with the primary the secondary windings connected in parallel.
  7. 1500 Vrms, one minute primary to secondary isolation.

종단 처리:

  • L = RoHS tin-silver over tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order)

패키지:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

ga3271s.gif

Primary windings and secondary windings
to be connected in parallel on the PC board.

물리적 특성

ga3271d.gif

dims_inches_mm-(5).gif

테이프 및 릴 사양

tapereel_pl-(39).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(2).gif
200 330 100 13 50,4 44,4 44 28 4 2 9,6 0,4

일반 사양

코어 소재:
Ferrite
중량:
5.5 g
패키지:
200 per 13″ reel Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf

관련 제품 시리즈