사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

C1173 Flyback Transformer

for Texas Instruments TSP23750

RoHS 준수
  • Developed for TI TPS23750 PoE PD controller (PMP929 reference design)
  • Isolated, synchronous flyback transformers for IEEE 802.3af PoE applications

지금 구매:
개수 단품 가격
1 $3.93
200 $3.37
600 $2.94
1200 $2.27
2400 $1.97
5000 $1.81

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Texas Instruments TPS23750와(과) 호환

부품 번호 입력 전압 출력 1 전력 FSW
Sec Drive Bias
C1173-AL_ 18 V 72 V 3.3 V , 3 A 5.6 V , 0.01 A 10 V , 0.02 A 9.9 W 500 kHz
C1174-AL_ 18 V 72 V 5 V , 2 A 7.5 V , 0.01 A 10 V , 0.02 A 10 W 500 kHz
GA3562-BL_ 18 V 72 V 12 V , 0.83 A 6 V , 0.01 A 10 V , 0.02 A 10 W 500 kHz

사양

Electrical specifications at 25°C.

부품 번호 2
(Hover for schematics)
인덕턴스
@ 0A (µH) 3
(허용 오차: ±10%)
인덕턴스
최소 @   1.2 A (µH)
DCR max (Ω) 4 누설
인덕턴스
최대 (µH) 5
권수비 6 절연
전압 (Vrms) 7
Pri Sec Drive Bias Pri Drive Pri : Sec : Drive : Bias
C1173-AL_ 166.5 150.0 0.770 0.020 0.523 1.120 2.50 0.40 1 : 0.154 : 0.27 : 0.5 1500
C1174-AL_ 150.0 135.0 0.515 0.023 0.570 0.880 2.00 0.40 1 : 0.2 : 0.313 : 0.44 1500
GA3562-BL_ 166.5 150.0 0.740 0.100 0.456 1.150 2.05 0.25 1 : 0.5 : 0.25 : 0.5 1500
메모
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 10 V, 20 mA.
  2. When ordering, please specify packaging code: e.g. C1174-ALD
  3. Inductance is for the primary, measured at 100 kHz, 0.1 Vrms.
  4. DCR for secondary is with windings connected in parallel.
  5. Leakage inductance for the primary is with the secondary and drive windings shorted; leakage inductance for the drive winding is with the secondary windings shorted.
  6. Turns ratio is with both secondary windings connected in parallel.
  7. 1500 Vrms, one minute isolation from the primary and bias windings to the secondary.

종단 처리:

  • RoHS-compliant  260°C compatible. Tin-silver (96.5/3.5) over tin over nickel over phos bronze terminations. Other terminations available at additional cost.

패키지:

  • D = 13" machine-ready reel. EIA 481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

c1173s.gif
Secondary windings to be connected
in parallel on PC board.

물리적 특성

c1173d.gif


dims_inches_mm.gif
 

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
200 330 100 13 50,4 44,4 44 28 4 2 9,6 0,35

일반 사양

코어 소재:
Ferrite
중량:
5.0 – 5.3 g
패키지:
200 per 13″ reel Plastic tape: 44 mm wide, 0.35 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info.

관련 제품 시리즈