사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

C1099 Flyback Transformer

for Maxim MAX5941A PoE Interface

RoHS 준수
  • Developed for Maxim MAX5941A PoE Interface/PWM Controller
  • Interleaved primary and secondary windings
  • RoHS-compliant. 260°C compatible. Tin-silver over tin over nickel over phos bronze terminations

지금 구매:
개수 단품 가격
1 $3.37
200 $2.89
600 $2.52
1200 $1.97
2400 $1.68
5000 $1.54

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Maxim MAX5941A와(과) 호환

입력 전압 출력 1 전력 FSW
Sec Bias
32 V 56 V 3.3 V , 2.5 A 14 V 8.25 W 300 kHz

사양

Electrical specifications at 25°C.

부품 번호 2
(Hover for schematics)
인덕턴스
@ 0A (µH) 3
(허용 오차: ±5%)
인덕턴스
최소 @   0.9 A (µH)
DCR max (Ω) 4 누설
인덕턴스
최대 (µH) 5
권수비 6 절연
전압 (Vrms) 7
Pri Sec Bias Pri : Sec : Bias
C1099-AL_ 133 126 0.283 0.013 0.480 3.5 1 : 0.13 : 0.57 1500
메모
  1. Output of the secondary is with the windings connected in parallel. Bias winding output is 14 V.
  2. When ordering, please specify packaging code: e.g. C1099-ALD
  3. Inductance is for the primary, measured at 300 kHz, 1.0 Vrms.
  4. Primary DCR is measured with the windings connected in series. Secondary DCR is measured with the windings connected in parallel.
  5. Leakage inductance is for the primary winding with the secondary winding shorted.
  6. Turns ratio is for the primary connected in series and the secondary connected in parallel.
  7. 1500 Vrms, one minute primary to secondary isolation.
    500 Vrms, one minute primary to bias isolation.

종단 처리:

  • RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost.

패키지:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (200 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D
환경
환경:
RoHS 준수
주변 온도 범위:
40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

c1099s.gif

Primary windings to be connected in series
and secondary windings to be connected in
parallel on the PC board.

물리적 특성

c1099d.gif


dims_inches_mm-(4).gif

테이프 및 릴 사양

tapereel_pl-(36).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c-(1).gif
200 330 100 13 50,4 44,4 44 28 4 2 9,0 0,37

일반 사양

코어 소재:
Ferrite
중량:
5.7 g
패키지:
200 per 13″ reel Plastic tape: 44 mm wide, 0.37 mm thick, 28 mm pocket spacing, 9.0 mm pocket depth.

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info.

관련 제품 시리즈