View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet S-Param

MSD7342-334

Name: MSD7342-334MLC
Brand: Coilcraft
SKU: MSD7342-334MLC
Price: 0.93 USD
Availability: InStock

MSD7342-334MLC

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$2.99
250	$1.99
500	$1.19
1000	$0.93
2500	$0.80
5000	$0.74

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

M = 20%

Termination

L = Matte tin over nickel

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

플라이백 용도

부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	절연 전압 (V)	누설 인덕턴스 (µH) 5	권수비
부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	절연 전압 (V)	누설 인덕턴스 (µH) 5	권수비
MSD7342-334ML_	330	2.7	200	1.7	1 : 1

SEPIC 용도

부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	결합 계수	누설 인덕턴스 (µH) 5	Isat (A) 6			Irms (A)
부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	결합 계수	누설 인덕턴스 (µH) 5	10% drop	20% drop	30% drop	양측 권선 7	단일 권선 8
MSD7342-334ML_	330	2.7	3.0	>0.99	1.7	0.49	0.52	0.54	0.24	0.34

메모

When ordering, please specify termination and packaging codes: MSD7342-105MLC.
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage inductance is for L1 and is measured with L2 shorted.
Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

종단 처리:

L = Matte tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +85°C with (40°C rise) Irms current.

보관 온도 범위:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+125°C (ambient + temp rise).

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs Current

Inductance vs Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	1000*	178/330	60/100	13	22,4	16,4	16	12	4	2	4,9	0,4

* Special order

일반 사양

코어 소재:

Ferrite

중량:

0.76 – 0.87g

패키지:

250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.4 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth

Winding to Winding Isolation:

200 Vrms, one minute

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품

창고

언어 설정

통화 설정

MSD7342-334

MSD7342-334MLC

이 부품 공유

선택한 구성 공급 불가

사양

플라이백 용도

SEPIC 용도

종단 처리:

패키지:

성능 곡선

Inductance vs Current

Inductance vs Frequency

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품

MSD7342-103

MSD7342-104

MSD7342-105

MSD7342-123

MSD7342-124

MSD7342-153

MSD7342-154

MSD7342-183

MSD7342-184

MSD7342-223

MSD7342-224

MSD7342-252

MSD7342-273

MSD7342-274

MSD7342-332

MSD7342-333

MSD7342-393

MSD7342-394

MSD7342-472

MSD7342-473

MSD7342-474

MSD7342-562

MSD7342-563

MSD7342-564

MSD7342-682

MSD7342-683

MSD7342-684

MSD7342-822

MSD7342-823

MSD7342-824

경고