View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet S-Param

MSD1260-824

Name: MSD1260-824KLD
Brand: Coilcraft
SKU: MSD1260-824KLD
Price: 0.81 USD
Availability: InStock

MSD1260-824KLD

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$2.68
250	$1.74
500	$1.05
1000	$0.81
2500	$0.70
5000	$0.64

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Tolerance

K = 10%

Termination

L = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

플라이백 용도

부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (Ω) 3	절연 전압 (V)	누설 인덕턴스 (µH) 5	권수비
부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (Ω) 3	절연 전압 (V)	누설 인덕턴스 (µH) 5	권수비
MSD1260-824KL_	820	2.7	500	2.9	1 : 1

SEPIC 용도

부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (Ω) 3	SRF typ (kHz) 4	결합 계수	누설 인덕턴스 (µH) 5	Isat (A) 6	Irms (A)
부품 번호 1 (Hover for schematics)	인덕턴스 (µH) 2 (허용 오차: ±10%)	DCR max (Ω) 3	SRF typ (kHz) 4	결합 계수	누설 인덕턴스 (µH) 5	Isat (A) 6	양측 권선 7	단일 권선 8
MSD1260-824KL_	820	2.7	1500	>0.99	2.9	0.79	0.37	0.52

메모

When ordering, please specify termination and packaging codes: e.g. MSD1260-105KLD
Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
Leakage Inductance is for L1 and is measured with L2 shorted.
Isat: DC current, at which the inductance drops 30% (typ) from its value without current. It is the sum of the current flowing in both windings.
Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

종단 처리:

L = RoHS compliant matte tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13" reel, machine-ready
EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel
Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +85°C with (40°C rise) Irms current.

보관 온도 범위:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+125°C (ambient + temp rise).

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs. Current

Inductance vs. Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	330	100	13	30,4	24,4	24	16	4	2	6,9	0,5

일반 사양

코어 소재:

Ferrite

중량:

2.8 – 3.2 g

패키지:

500/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16 mm pocket spacing, 6.9 mm pocket depth

Winding to Winding Isolation:

500 Vrms, one minute

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

관련 제품

창고

언어 설정

통화 설정

MSD1260-824

MSD1260-824KLD

이 부품 공유

선택한 구성 공급 불가

사양

플라이백 용도

SEPIC 용도

종단 처리:

패키지:

성능 곡선

Inductance vs. Current

Inductance vs. Frequency

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품

MSD1260-103

MSD1260-104

MSD1260-105

MSD1260-123

MSD1260-124

MSD1260-153

MSD1260-154

MSD1260-183

MSD1260-184

MSD1260-223

MSD1260-224

MSD1260-273

MSD1260-274

MSD1260-333

MSD1260-334

MSD1260-393

MSD1260-394

MSD1260-472

MSD1260-473

MSD1260-474

MSD1260-562

MSD1260-563

MSD1260-564

MSD1260-682

MSD1260-683

MSD1260-684

MSD1260-822

MSD1260-823

경고