3D Model Datasheet

WA8582-AL

Isolation Transformer

Designed specifically for automotive active cell balance battery management system.
Suitable for power driver ICs, low power isolation, gate drive and other power applications.
AEC-Q200 Grade 1 (−40°C to +125°C)

지금 구매:

개수	단품 가격
1	$3.39
200	$2.88
600	$1.73
1200	$1.35
3000	$1.18
6000	$1.08

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1 (Hover for schematics)	전력 (W) 2	일차/이차 전압 (V)	인덕턴스 @ 0A (µH) 3 (허용 오차: ±25%)	DCR max (Ω) 4		권수비	전압시간적 (V-µs) 5	절연 전압 (Vrms) 6
부품 번호 1 (Hover for schematics)	전력 (W) 2	일차/이차 전압 (V)	인덕턴스 @ 0A (µH) 3 (허용 오차: ±25%)	Pri	Sec	Pri : Sec	전압시간적 (V-µs) 5	절연 전압 (Vrms) 6
WA8582-AL_	2	5 / 5	136.8	0.310	0.475	1 : 1.33	22.7	1500

메모

When ordering, please specify termination and packaging codes: e.g. WA8582-ALD
Calculated output power based on 250 kHz operating frequency. Power varies depending on application.
Inductance is for the primary, measured from pins 1 to 2 at 250 kHz, 0.1 Vrms, 0 Adc.
DCR is for each winding of the primary and secondaryat 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Volt-time product is for the primary, between pin 1 and 4, with 2 and 3 connected.
1500 Vrms, one minute primary to secondary isolation (hipot); 500 Vrms winding to core isolation.

종단 처리:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (600 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +125°C

보관 온도 범위:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	330	100	13	30,4	24,4	24	16	4	2	6,1	0,37

일반 사양

코어 소재:

Ferrite

중량:

0.95 g

패키지:

600/13″ reel; Plastic tape: 24 mm wide, 0.37 mm thick, 16 mm pocket spacing, 6.1 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

WA8582-AL

Isolation Transformer

사양

종단 처리:

패키지:

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

Transformers

Isolation Transformers

ZA9801-AE Series

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

HTX7045 Isolation Transformers

창고

언어 설정

통화 설정

WA8582-AL

Isolation Transformer

선택한 구성 공급 불가

사양

종단 처리:

패키지:

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

Transformers

Isolation Transformers

ZA9801-AE Series

Isolation Transformer

Transformers

Isolation Transformer

Miniature Surface Mount Transformers

Isolation Transformers

TX1 Push-Pull Transformers

Isolation Transformer

Isolation Transformer

Isolation Transformer

ZA9668-AE and ZB1175-AE Isolated Buck Transformers

PA6598-AL Isolation Transformer

WA8417-AL Fly-Buck Transformer

HTX7045 Isolation Transformers

경고