사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

TX2 Push-Pull Transformers

for Texas Instruments SN6507-Q1

RoHS 준수 할로겐 프리 AEC-Q flag
  • Optimized for Texas Instruments SN6507-Q1 transformer driver
  • Low EMI, robust push-pull transformers for gate driver power supplies
  • 10 mm creepage and clearance, Material Group 1
    • Insulation level may be Functional, Basic, or Reinforced depending on application variables such as working voltage, pollution degree, OVC, and altitude. Please contact Coilcraft for full details.
  • 5000 Vrms, one minute high isolation (hipot) winding to winding
  • AEC Q200 qualified

지금 구매:

The part number you have selected is not available through our online store.

Please click the "Request Quote" button for pricing and more information.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Texas Instruments SN6507-Q1와(과) 호환

부품 번호 일차 전압 이차 전압 전력 1 FSW
TX2-ZE2427-AED 12 V 15 V 7.5 W 1000 kHz
TX2-ZE2428-AED 12 V 30 V 15 W 1000 kHz
TX2-ZE2429-AED 24 V 15 V 7.5 W 1000 kHz
TX2-ZE2430-AED 24 V 30 V 15 W 1000 kHz

사양

Electrical specifications at 25°C.

부품 번호
(Hover for schematics)
인덕턴스
@ 0A (µH) 2
DCR max (Ω) 3 누설
인덕턴스
최대 (µH) 4
권수비 전압시간적
(V-µs) 5
절연
전압 (Vrms) 6
Pri Sec Pri : Sec
TX2-ZE2427-AED 99.7 0.10 0.15 0.55 1 : 1.4 22 5000
TX2-ZE2428-AED 99.7 0.12 0.41 0.6 1 : 2.8 22 5000
TX2-ZE2429-AED 196.0 0.12 0.11 1.0 1 : 0.71 30 5000
TX2-ZE2430-AED 196.0 0.17 0.24 1.2 1 : 1.43 30 5000
메모
  1. Calculated Output Power will vary depending upon application.
  2. Inductance is for the primary, measured between pins 4 and 1 with pins 2 and 3 connected at 1 MHz, 0.1 Vrms, 0 Adc.
  3. DCR is per winding.
  4. Leakage inductance is for the primary with both windings connected in series and with the secondary windings shorted.
  5. Volt-time product is for the primary, between pins 4 and 1 with pins 2 and 3 connected.
  6. 5000 Vrms, one minute isolation (hipot) between primary and secondary windings.

종단 처리:

  • RoHS-compliant. 260°C compatible. RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost.

패키지:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (550 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+165°C (ambient + temperature rise)
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

ze242x_ze2430s.gif

물리적 특성

tx2d.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
550 330 100 13 38,4 32,4 32 16 4 2 7,1 0,5

일반 사양

코어 소재:
Ferrite
중량:
1.26 – 1.30 g
패키지:
550 per reel, 13″ reel Plastic tape: 32 mm wide, 0.50 mm thick, 16 mm pocket spacing, 7.1 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈